All parts have under 1500 miles. This is a complete system minus fuel rails and sumped gas tank. All fittings included. Should support up to 1200 hp ( maybe more ) forced induction.
1. Aeromotive Eliminator fuel pump #11104
2. Aeromotive high flow Y block #15620
3. Aeromotive Billet Fuel pump controller #16302
4. Aeromotive Adustable fuel pressure regulator ( boost reference ) and guage #13101
5. Aeromotive Chrome Pro Series -12 filter 100 micron #12302
6. Aeromotive Red fuel filter -10 10 micron #12301
7. Braded Hoses with fittings on each end to connect...
a. -12 from sump to prefilter on pump ( ~2' long )
b. -10 from post filter on pump to Y block ( ~11' long )
c. -8 from Y block to rails ( 2 of these, each about 18"-2' long )
d. -8 fron rails to regulator ( 2 of these, each about 24 - 30" long )
e. -8 return line from regulator to tank ( ~13' long )
This was on my 97 cobra and should fit almost any other car. May have to trim the lines for your application. Askin 1300$ plus shipping.
thanks,
Danny
1. Aeromotive Eliminator fuel pump #11104
2. Aeromotive high flow Y block #15620
3. Aeromotive Billet Fuel pump controller #16302
4. Aeromotive Adustable fuel pressure regulator ( boost reference ) and guage #13101
5. Aeromotive Chrome Pro Series -12 filter 100 micron #12302
6. Aeromotive Red fuel filter -10 10 micron #12301
7. Braded Hoses with fittings on each end to connect...
a. -12 from sump to prefilter on pump ( ~2' long )
b. -10 from post filter on pump to Y block ( ~11' long )
c. -8 from Y block to rails ( 2 of these, each about 18"-2' long )
d. -8 fron rails to regulator ( 2 of these, each about 24 - 30" long )
e. -8 return line from regulator to tank ( ~13' long )
This was on my 97 cobra and should fit almost any other car. May have to trim the lines for your application. Askin 1300$ plus shipping.
thanks,
Danny