Best place to mount BOV?

[Triple Black]

Got a v1 s-trim for my cobra and want to cool the charge with Meth injection. Mainly because I want a cleaner install look. Less piping etc. So where to mount this thing? I suppose my choices are limited to somewhere on the aluminum part of the outlet tubing? I'd like to buy an outlet pipe with a bung for the BOV already welded on if I could locate one. Any ideas? Thanks.

 

[Blown_By_You]

Um, are you running a blow thru mass air?

douchebaggery brought to you by tapatwat

 

[stangbanger856]

Ya no blow threw MAF (mounted between the S/C and T body) no blow off valve but you can use a By pass valve wich recirculates the air back in front of the S/C and after the MAF.

I just upgraded mine from the stock.Bosh typy valve to a Vortech Mini race valve and just waiting to finish it up. Look in the blower bistro for the thread I started to see pics.

 

[98 Saleen Cobra]

Pretty much has been said already.. Check out the blower bistro and you'll see my setup.

 

[Triple Black]

Pretty much has been said already.. Check out the blower bistro and you'll see my setup.

Ill check that out. Thanks.