Used 0-100PSI Cobalt oil pressure.
On the senders harness, I noticed one of the wires had been rubbing in the time it was used, the sheathing was open a little bit, about 3/8" inch. I put a good length of heat shrink over it, the gauge was fully functional prior to removal.
$100 shipped, UPS ground. Paypal.
On the senders harness, I noticed one of the wires had been rubbing in the time it was used, the sheathing was open a little bit, about 3/8" inch. I put a good length of heat shrink over it, the gauge was fully functional prior to removal.
$100 shipped, UPS ground. Paypal.
