Comp Cams Stage 2 Xtreme Energy XE270AH Camshafts (for PI heads)
Details: http://www.summitracing.com/int/parts/cca-102600/overview/
$350 (gears not included)
Cloyes Hex-A-Just Adjustable Cam Gears
$200 (Will work out a deal if you want the cam gears and the cams)
RAM pressure plate and 6 puck clutch. Still has life left.
$150
Kooks Long Tubes with 3" collectors (2 bungs on driver's side for wideband)
$800
Innovators West 10% Overdrive Harmonic Balancer (8-rib) (include custom bolt)
$350
CPR Racing Blue Fuel Rails
These are the absolute best rails you can get, have the FRPS sensor port built right into the driver's side rail.
I will be including the black fabric crossover hose which is -8. The braided stainless hose will not be included, the 4 ORB adapters on the rails will be included however. These were only used for a few months, mint. FPRS not included.
$250
Custom Ice-Box. This is the exact size of a battery, and fits directly where the battery normally does in the front of the engine bay. Fill it with ice and water, or dry ice, and your intercooler water will run through the radiator inside. All tig welded, worked amazing with dry ice, got intercooler water temperature below freezing.
$250
2V PI Fully Ported Heads, custom. Recent 3 angle valve job. These heads include Comp Cams Bee-Hive Valve springs, custom thinned intake valves, hydraulic lash adjusters, and roller followers. DISCLAIMER: The heads need to be shaved a few thou to flatten them.
$700
8-rib harmonic balancer, couple weeks of use on it. $50
Also, set of .051" cometic head gaskets new in the packaging. Work on any mod motor, 2V, 3V, 4V, 4.6 or 5.4. (C5502-051, C5503-051)
$260 shipped.
Also, set of X-VIN H-Series Clevite Main Bearings, new in the box. Part: MS-2202H
$120 shipped
All prices OBO + shipping unless otherwise stated.
Details: http://www.summitracing.com/int/parts/cca-102600/overview/
$350 (gears not included)
Cloyes Hex-A-Just Adjustable Cam Gears
$200 (Will work out a deal if you want the cam gears and the cams)
RAM pressure plate and 6 puck clutch. Still has life left.
$150
Kooks Long Tubes with 3" collectors (2 bungs on driver's side for wideband)
$800
Innovators West 10% Overdrive Harmonic Balancer (8-rib) (include custom bolt)
$350
CPR Racing Blue Fuel Rails
These are the absolute best rails you can get, have the FRPS sensor port built right into the driver's side rail.
I will be including the black fabric crossover hose which is -8. The braided stainless hose will not be included, the 4 ORB adapters on the rails will be included however. These were only used for a few months, mint. FPRS not included.
$250
Custom Ice-Box. This is the exact size of a battery, and fits directly where the battery normally does in the front of the engine bay. Fill it with ice and water, or dry ice, and your intercooler water will run through the radiator inside. All tig welded, worked amazing with dry ice, got intercooler water temperature below freezing.
$250
2V PI Fully Ported Heads, custom. Recent 3 angle valve job. These heads include Comp Cams Bee-Hive Valve springs, custom thinned intake valves, hydraulic lash adjusters, and roller followers. DISCLAIMER: The heads need to be shaved a few thou to flatten them.
$700
8-rib harmonic balancer, couple weeks of use on it. $50
Also, set of .051" cometic head gaskets new in the packaging. Work on any mod motor, 2V, 3V, 4V, 4.6 or 5.4. (C5502-051, C5503-051)
$260 shipped.
Also, set of X-VIN H-Series Clevite Main Bearings, new in the box. Part: MS-2202H
$120 shipped
All prices OBO + shipping unless otherwise stated.
