Are 2010 and 2011-2012 X/H pipes interchangeable?

[rfugio68]

Hello guys,
I want to put cats back on my 2010 gt500. My buddy with a 2011 is willing to trade me his stock h pipe for my orx, will the mid-pipes connect to the manifold on both cars? also will it bolt up to the over-the-axle pipes as well? He is willing to trade the entire exhaust with hangers if need be.
-Thanks

 

[Stetler17]

11' up will bolt to your manifolds OK but not the over axels. 2.5 in 2010 and 2.75 for 2011 and up.

 

[Robert M]

Hello guys,
I want to put cats back on my 2010 gt500. My buddy with a 2011 is willing to trade me his stock h pipe for my orx, will the mid-pipes connect to the manifold on both cars? also will it bolt up to the over-the-axle pipes as well? He is willing to trade the entire exhaust with hangers if need be.
-Thanks

2010 is 2.50" diameter exhaust and 2011-up is 2.75". I would take the whole system as an upgrade to the smaller 2.50"




R

 

[Robert M]

^^^^^Adding to my post above...............at some point, either 2010 or 2011, the muffler hanger configuration changed, the earlier cars had a 2-point muffler hanger config. and the later cars had 3 points. <<This could also be an issue if the hanger points on the bottom of the car don't equal the mufflers, unless you don't mind cutting and re-welding hangers........




R

 

[rfugio68]

2010 is 2.50" diameter exhaust and 2011-up is 2.75". I would take the whole system as an upgrade to the smaller 2.50"




R

Thanks guys!