remove wheels
remove 2 caliper bolts 13mm I think (kinda hard to get to swivel makes it easier)
remove caliper
remove 2 anchor plate bolts 15 mm I think maybe 18mm
remove anchor plate
remove rotor
compress caliper piston (special tool needed for this)
install new rotor
install anchor plate
install new pads on anchor plate
install caliper
torque all bolts to specifications.
pretty easy job, may be time consuming if its your first.
also remove the caliper slides from the caliper clean them off with a rag and then lube them back up with some dialectric caliper grease.
