anyone ever do a oil cooler 01 cobra

[cobraetti]

I have read a few posts on other forums most say its very simple. I don't know if there doing it on a GT or what but I cant even see all the bolts?

 

[soccerman002]

I assume you mean install/uninstall?

When you remove the oil filter the hex head is exposed that secures it, that's it.

 

[devin_svt]

i was wondering the same... i have a leak that only drips for about 30 seconds when its cold, and once it warms up it stops. it dripping from the steering rack and from all the searching ive done it seems like this is a common thing on our 4vs. anyone have experience with this..?

 

[01yellercobra]

i was wondering the same... i have a leak that only drips for about 30 seconds when its cold, and once it warms up it stops. it dripping from the steering rack and from all the searching ive done it seems like this is a common thing on our 4vs. anyone have experience with this..?

Just do a search. It's pretty common.

 

[cobraetti]

I assume you mean install/uninstall?

When you remove the oil filter the hex head is exposed that secures it, that's it.

OMG so when the hex "bolt" is removed the it pulls off?

I saw four bolts on the housing to the block

 

[cobraetti]

OMG so when the hex "bolt" is removed the it pulls off?

I saw four bolts on the housing to the block

sorry its 2 piece my bad

 

[CJK440]

OMG so when the hex "bolt" is removed the it pulls off?

I saw four bolts on the housing to the block

The oil filter hex stud holds the cooler to the cooler specific oil filter adapter. The adapter is attached to the block with 4 bolts.