HA HAAAAAAAAAAAHahahaha that picture will say 7X0 and say stay tuned for final numbers 09/10/19
738? I think they covered the center of the right number for a reason.
Ya dont say. I don't think the 3rd number is a 0, but am probably wrong.Everyone knew the first number from the git go, the second number is the money shot.
I’m guessing 760hp.
Power dense means hp/l in my opinion.
Zr1 is 755hp 6.2L+2.65L so 93.0hp/L
Demon is 840hp, 6.2+2.7L so 94.4hp\L
I think 760hp. 738hp would mean 94.0hp/L
So by that, 750hp or 760 or 780 or 790 but knowing the alleged insider banter leaks say 740 was hard I’m guessing 750. Gut hunch is 760hp though.
I’ll say 760hp for 2 reasons.
1. Beat Chevy on paper
2. The speedo on the gt press image showed 4 55 and the car ended up at 460hp. The gt500 showed 7 55 so 760 could make sense.
2020 Mustang Shelby GT500 Horsepower and Torque - 760 HP, 625 Lb-Ft
760hp 625lbft
Sent from my iPhone using Tapatalk Pro
Woot! My hi pothesis was correct.
I need all the internets guys, hand em over.
I guessed 760hp yesterday. Feel shmart
They most likely traded torque for hp by extending the rev range. Squeezing 760 hp out of a 5.2 means the engine is closer to the limits where you can get reliability from the engine. Turning the wick up in any appreciable way in this engine will have you writing big checks if something goes wrongI was wrong, those tricky bastards!
Decent numbers though! I'm surprised the TQ is that low, I wonder how "artificially" restricted it is.
They said specifically that they were not going to do that. That the numbers would be announced once finalized.I guessed/hoped for 780. 760 still is nothing to be ashamed of. Wonder if they will up it like they did with the 2013. Announced 650 then when final numbwrs came in it was 662.
Sent from my SM-N960W using Tapatalk
I sure hope so and expect that to be the case, given how just the 5.0 motor can handle boost the way it does. I say they built it to at least 1k hp or more. We will see soon when all the specs come out.Did Ford upgrade the rotating assembly on the 2020. forged rods, billet crank sprocket and other components needed to support higher HP?