Any way to make these 15" Weld Wheels fit? (Pics)

[YellowCobra04]

I put on these 15" Weld Wheel Draglites a few nights ago and ran into a few problems. I was able to slip them on, but they were hitting the brakes and would not spin at all. I need less than 1/8" of clearance to make them work, but I don't want to modify the brakes. I was thinking I might be able to put a small spacer in there if there's a taper on the back wheel. I just wanted to know if any of yall have used the 15" Weld Wheels with out modifying anything.

If I cant get them to work, are there any 15" wheels that will clear the brakes.

 

[Sonic605hp]

spacers?

 

[BigSweezey]

Can't see the pic, cause I'm @ work.
If it's the back.....Last I heard, no. Gotta do some grinding to fit 15's on the stock cobra brakes.
For 15" skinnies up front, yeah you need a spacer.

 

[SETOMPK]

I have a 1 inch spacer and they fit on my car

 

[YellowCobra04]

I have a 1 inch spacer and they fit on my car

Do you also have the Weld Wheels, and did you have to do any modifications to your brakes?

 

[Venimus03]

If you still have the IRS in that thing you need to grind down the rear tie rod and spindle.