Another Offset Thread

McFarlandd

Founder Of Southern Ohio Streets Cars
Established Member
Joined
Aug 12, 2013
Messages
153
Location
Ohio
So here's my issue, I am wanting to run 18x9.5 ESR SR07 wheels, the only offset that will fit my Brembos are +22, and with the camber I'm running my front tires will fit flush with the front fenders. In the rear they will poke put around 1/4" which I would like to avoid.

My question is, if I went to a +35 in the rear, would the difference in offset from front to rear look off or would it look fine.
227b2624cc03155ed8ad06df2e15c27e.jpg

2be8a9dda033547ed7cd0b49017c76e0.jpg


Sent from my SM-G935V using Tapatalk
 

4.SLOW

Member
Established Member
Joined
Nov 13, 2014
Messages
56
Location
Dallas
Using the +35 offset will make the rear sit flush as well. It should look good with those offsets.
 

McFarlandd

Founder Of Southern Ohio Streets Cars
Established Member
Joined
Aug 12, 2013
Messages
153
Location
Ohio
Using the +35 offset will make the rear sit flush as well. It should look good with those offsets.
So you don't think the front will look wider than the rear?

Sent from my SM-G935V using Tapatalk
 

4.SLOW

Member
Established Member
Joined
Nov 13, 2014
Messages
56
Location
Dallas
It should not. The wheels I'm running are 11 inches wide and the space from the hub to the face of the wheel is about 4", a small bit further out than your 9.5 et22 front wheels. The rear offset sits them about the same as the et35 wheels.
 

McFarlandd

Founder Of Southern Ohio Streets Cars
Established Member
Joined
Aug 12, 2013
Messages
153
Location
Ohio
It should not. The wheels I'm running are 11 inches wide and the space from the hub to the face of the wheel is about 4", a small bit further out than your 9.5 et22 front wheels. The rear offset sits them about the same as the et35 wheels.
Do you have any pictures of this setup?

Sent from my SM-G935V using Tapatalk
 

4.SLOW

Member
Established Member
Joined
Nov 13, 2014
Messages
56
Location
Dallas
I'm out of town and don't have any pictures of my car on my phone, but the attached picture is a car with the same wheels, size and offset.

8d9fea6ea2d84545cd2fbe0c84f4b118.jpg
 

greenscobie86

Active Member
Established Member
Joined
Apr 2, 2010
Messages
598
Location
NYC
Cool thread, good info here. Not to hijack but I assume tis safe to run these wheels 18x9.5 with an ET22 all around?
 

McFarlandd

Founder Of Southern Ohio Streets Cars
Established Member
Joined
Aug 12, 2013
Messages
153
Location
Ohio
Cool thread, good info here. Not to hijack but I assume tis safe to run these wheels 18x9.5 with an ET22 all around?
I am running 22 front with a 245/45 18 and 35 rear with 285/40 18 and the wheels and tires are square on all 4 corners.

Sent from my SM-G935V using Tapatalk
 

Users who are viewing this thread



Top