Anderson n41 cam

[Modestoe3]

My friend decided to go 351w on his fox so he started parting out his 302 and I called first dibs on his Anderson n41 cam, what do you guys think about the cams power band? And drive ability? Ima install tfs twisted wedge heads with a gt40 intake at the same time and 4.10 gears. Do you guys think I should get a different intake like a Holley systemax? Something that makes power in the same place the n41 cam does. The tfs heads are ported btw.


Sent from my iPhone using the svtperformance.com mobile app

 

[crazycarlo]

If you can afford it go with a better
Intake. If not its not a huge deal. If you can find one get a lower that porter by TMOSS.

 

[Modestoe3]

I've been thinking and will get a Holley systemax used and port match it to my tfs heads they are ported to felpro 1250.


Sent from my iPhone using the svtperformance.com mobile app

 

[crazycarlo]

The systemax is a good intake. If love either it or a performer RPM 2 for my car.

 

[grd951]

Had that same cam with a set of junk tri state heads and the systemax. It ran strong but the heads out of the box limited flow. Made 300hp 340tq on a 331. Driveability was nice and I'm sure if I would have kept it it would have done better with different heads. Hope this helps!


Sent from my iPhone using the svtperformance.com mobile app