Does anyone know or have a link to the adapters to run AN lines off the stock fuel hat? I know the feed is 3/8 and return is 1/4. I just see several "quick connect" adapters and don't know which ones to get. Feed will be -8 and return -6.
-AN adapters for fuel pump hat
- Thread starter boost88
- Start date
I think I found them on lmr. However I'm curious why the fuel filter is 5/16 in and out but it says the fuel hat is 3/8 out. Any ideas
Sent from my SM-G988U using the svtperformance.com mobile app
Sent from my SM-G988U using the svtperformance.com mobile app
I don't know why it is, but those sound right. Maybe it is to build velocity at the filter..
I found a pack that has a 5/16 and 3/8 I'll just order that and be done I guess. Let's just hope it's a 1/4 return which I'm semi sure it is
Sent from my SM-G988U using the svtperformance.com mobile app
Sent from my SM-G988U using the svtperformance.com mobile app
Iirc 5/16 Nylon fuel line goes ok into 1/4 brass barb with a bit of heating in water.
I used small oetiker clamps on it as well.
There is also 8mm end to 9mm end flexible corrugated fuel lines as well as other size combos...on amazon.
I don't know what you are doing, so just throwing it out there.
Any fuel line can be covered with split rubber fuel hose and permatex down the seam to protect it.
Last edited:
I'm switching out all my rubber/hardlines and running ptfe hose for my fuel system. I'm gonna switch over to e85 and while the factory lines will work I store the car all winter and just don't want to mess with draining the tank
Sent from my SM-G988U using the svtperformance.com mobile app
Sent from my SM-G988U using the svtperformance.com mobile app
Users who are viewing this thread
