I have an aluminator short block that was built by livernois motorsports.
It is a standard 4.6 bore with a stroker crank, has a Kellogg forged crank, Manley h beam rods, arp 2000 hardware, and mahle Pistons.
Before installing it in another car I personally would go .20 over pistons with new rings. Car did have a little blow by when the motor was removed.
Asking 2000 obo plus fees/freight
Melling oil pump with billet gears
Less than 5000 miles on this pump.
Asking 350 obo plus fees
7qt oil pan
Pan was used with a Vortech setup so it has the return line on front of pan. You just need a plug if you aren't running a turbo/centri setup
Asking 200 obo plus fees
I will ship the pump and pan for free and will work with you on the freight for the shortblock.
Call text or message me
810310069six
Sent from my iPhone using Tapatalk
It is a standard 4.6 bore with a stroker crank, has a Kellogg forged crank, Manley h beam rods, arp 2000 hardware, and mahle Pistons.
Before installing it in another car I personally would go .20 over pistons with new rings. Car did have a little blow by when the motor was removed.
Asking 2000 obo plus fees/freight
Melling oil pump with billet gears
Less than 5000 miles on this pump.
Asking 350 obo plus fees
7qt oil pan
Pan was used with a Vortech setup so it has the return line on front of pan. You just need a plug if you aren't running a turbo/centri setup
Asking 200 obo plus fees
I will ship the pump and pan for free and will work with you on the freight for the shortblock.
Call text or message me
810310069six
Sent from my iPhone using Tapatalk