Alternator with Sullivan, what one?

[oneslo5.0]

Last night while mocking up the alternator with a 99-01 braket(and alternator) it wouldn't fit. Our next guess was one from a F-150 but anyone that has a sullivan, what one did you use?

 

[badblacklx]

Don't you have to run a spacer for plenum if I remember right?

 

[oneslo5.0]

Don't you have to run a spacer for plenum if I remember right?

Good question, the manifold was used and didn't recieve any spacer.

 

[badcobra]

I have a 1" spacer in between the lower and plenum.

 

[04whitesvtlight]

I was running a 1" spacer (pretty sure it was 1") with my suly upper and lower and still had to grind a little off the stud/nut that attaches the electrical cable on top of the alternator but it does fit.

 

[JetmechF16]

I'm also running a Wilson Manifolds spacer.

 

[SVTurbo 98]

stock style alternator with a 1" spacer.

 

[Lstruck03]

01 alternator. used a 1" spacer as well. i also trimmed the power cable stud and dropped the alternator about 1/4" by grinding on the bottom two mounting points. It was still a tight squeeze