Alt Pulley help

[weswtbcobra]

what is the best way to get to the alt pulley? looks like a bitch from up top- easier from underneath?

 

[jm@ReischePerf]

Some people have claimed to get a low profile impact gun on it somehow. Maybe by moving rad and ac H/E, not sure. I myself just pulled the alt and took it somewhere that had a decent impact gun.

 

[Juruense]

Best to remove the alt to swap pulleys.

 

[piss&vinegar]

I agree! Remove it first. I just got done pulling mine since the bearings were squeaking. Got them replaced and no more squeak!

 

[2thman]

I agree! Remove it first. I just got done pulling mine since the bearings were squeaking. Got them replaced and no more squeak!

where did you get them replaced at? thnks

jason

 

[IronTerp]

Just pull the alternator out through the bottom and get an impact wrench on that sucka.......tons of us have done it.

 

[Dana]

You can loosen the alt and point it downwards to swap the pulleys. You don't have to completely remove it from the car. You will have to use an impact gun to do the swap though. Getting the battery out of the way helps access to the top of the alt.

Dana

 

[weswtbcobra]

thanks guys- i actually just removed the battery and the battery tray and it was no problem getting to it.
thanks for everyones help!