So I'm gathering all the components needed to install a Sub amplifier to my existing 2012 regular Shaker Sound System [Base model w/o Nav & w/o factory Subs]:
"]
[/URL]
[Not pictured- 1F Capacitor, RCA cables & speaker wire]
I tried searching here [SVTP] but some how I keep getting a Google "error" message & I have seen a couple of posts similar to my situation which I was trying to locate for reference
I am getting ready to do the install myself & have every necessary component to complete the install in a day but not spend all day doing it.....
..................................................................................................................................................................
I have a couple of "leftover" line-out converters [speak wire to RCA] but I see others are using Audio Control LC2i converter [w/ ACR-1 remote] instead which I may emulate as well...
LC2i 2ch Line Out Converter with AccuBASS(tm) and Subwoofer Control
My amp has a remote/lead turn-on connection: Does the LC2i have remote/lead to turn on my amp?
[If NOT & based on wiring diagram below] which wire would I need to tap into to connect the remote/lead from my amp and would I need a step-down [12V to 5V] converter like this one [I found on Crutchfield]:
Axxess AFDI-5V 12-volt to 5-volt converter — eliminates the turn-on "thump" in Ford-built vehicles with amplified systems at Crutchfield.com
...........................................................................................................
So I found a sound system wiring diagram but it's for 2011-
Ford Service Manuals - Wiring Diagrams
I know [so far] the factory amp that I want to "tap" into is in the driver's side kick panel & the wire harness is the right side one [one closest to fire-wall]
So is it safe to say the above 2011 diagram would also apply to a 2012?
According to the diagram, I need to look for [L] white & white/brown wires and [R] white/violet & white/orange wires.... is that correct?
Now for the Ground wire for the amp- I plan to mount my amp some where on the passenger side [trunk]. Where should I attach the wire to the chassis on the right side? Is there a bolt in the vicinity or do I have drill a hole & use a nut/bolt set-up?
I want to keep the spare tire well clear, for me its useable space
Was hoping some one could post pics of their installs specifically the wire connections or pm me the details
Thanks
[Not pictured- 1F Capacitor, RCA cables & speaker wire]
I tried searching here [SVTP] but some how I keep getting a Google "error" message & I have seen a couple of posts similar to my situation which I was trying to locate for reference
I am getting ready to do the install myself & have every necessary component to complete the install in a day but not spend all day doing it.....
..................................................................................................................................................................
I have a couple of "leftover" line-out converters [speak wire to RCA] but I see others are using Audio Control LC2i converter [w/ ACR-1 remote] instead which I may emulate as well...
LC2i 2ch Line Out Converter with AccuBASS(tm) and Subwoofer Control
My amp has a remote/lead turn-on connection: Does the LC2i have remote/lead to turn on my amp?
[If NOT & based on wiring diagram below] which wire would I need to tap into to connect the remote/lead from my amp and would I need a step-down [12V to 5V] converter like this one [I found on Crutchfield]:
Axxess AFDI-5V 12-volt to 5-volt converter — eliminates the turn-on "thump" in Ford-built vehicles with amplified systems at Crutchfield.com
...........................................................................................................
So I found a sound system wiring diagram but it's for 2011-
Ford Service Manuals - Wiring Diagrams
I know [so far] the factory amp that I want to "tap" into is in the driver's side kick panel & the wire harness is the right side one [one closest to fire-wall]
So is it safe to say the above 2011 diagram would also apply to a 2012?
According to the diagram, I need to look for [L] white & white/brown wires and [R] white/violet & white/orange wires.... is that correct?
Now for the Ground wire for the amp- I plan to mount my amp some where on the passenger side [trunk]. Where should I attach the wire to the chassis on the right side? Is there a bolt in the vicinity or do I have drill a hole & use a nut/bolt set-up?
I want to keep the spare tire well clear, for me its useable space
Was hoping some one could post pics of their installs specifically the wire connections or pm me the details
Thanks