I have done some searching but have not really seen a good answer. Trying to lose some weight up front without going full coilover. Does anyone make a quality k-member that will work with stock a-arms so I can keep my springs and struts?
Aftermarket k-member with stock a-arms
- Thread starter fjules
- Start date
QA1 makes a K member that uses stock A arms and springs. They say you'l get a 30 lb weight reduction, but I believe it is more like 26 lbs. Here it is for $249:
http://dagostinoracing.com/index.php?main_page=product_info&products_id=10093
Now, if you go with the UPR "kit" for $699, you get the full deal: K member, light weight a arms, coil overs. You'll save 65 lbs with this setup and from a performance standpoint, this is the way to go.
http://dagostinoracing.com/index.php?main_page=product_info&products_id=10093
Now, if you go with the UPR "kit" for $699, you get the full deal: K member, light weight a arms, coil overs. You'll save 65 lbs with this setup and from a performance standpoint, this is the way to go.
pa racing kit here with stock arms and springs it went on perfect no mods done to anything except moving some lines out the way in the back... no big deal at all fits perfect.
Users who are viewing this thread
