Accessing the rear serpentine belt...

[03kevo]

Any particular way of accessing the rear belt system of a terminator ie what needs to come out etc. Need to change idlers.

Thank you

 

[hotcobra03]

after the caged lower is off its a walk in the park...

 

[milenko1247]

I just took off the upper bridge and worked the belt out of the lower bracket

 

[Co-brat]

I removed the supercharger belt, the large aftermarket idler (if you have one) and the Pulley bridge and it should be pretty easy to figure out from there. It will probably take you a couple hours but isnt all that bad.