Here's a few pics of our car being put together at Power By The Hour in Boynton Beach, FL. Our good friend Jake and his crew worked extremely hard the last 2 days working extra long hours to get everything done for the article. I'm only going to post a few pics for now as you'll be able to see the entire thing in an up coming 5.0 Mustang Magazine! Big thanks to Steve Turner for taking so much interest in our car and spending 2 full 90+deg days with us at the shop. Thanks to everyone else involved.
Here's a list of everything that we installed.
Boss330 Racing Long Block- Ford GT Aluminum Block, Manley I-Beams, Custom CP Pistons/Rings, ARP Hardware, Custom Heads by Chris@Champion, Custom cams spec'd by Al Papitto, Bronze valve guides, stainless valves, high lift springs and retainers, Innovators West 10% Overdrive Crank Pulley
Whipple 3.4L Crusher Kit with Whipple Throttle Body and Whipple CAI
American Racing Headers 1-7/8" Longtubes with 3" Offroad X-pipe
Magnaflow 3" Catback with Magnapack Mufflers
Lethal Performance Triple Pump Return Style Fuel System-Featuring Fore Precision Works Fuel Hat, Rails and Y-Blocks
Siemens Deka 80lb High Impedence Injectors
Fore Precision Works 8.8 Billet Differential Cover
Shelby Dual Pass Heat Exchanger by Revan Racing/C&R Racing
Reische Performance 170deg High Performance Thermostat
Moroso Intercooler Reservoir and Radiator Expansion Tank
Mcleod RXT Twin Disc Clutch kit with Steel Flywheel
Driveshaft Shop 3.5" Aluminum Driveshaft
BMR K-Member, Adjustable A-Arms, K-member support brace, Driveshaft loop
Steeda Complete Rear Drag Suspension- Competition Upper and Lower Control Arms, Panhard Rod, Panhard Brace, Torque Box Brace
Eibach Sportline Springs
QA1 Front Coil Over Kit with UPR Springs
QA1 Caster Camber Plates
QA1 Adjustable Rear Shocks
Steeda Tri-ax Shifter
Project 321 Coil Covers and Engine Bay Dress Up Kit
ThumpRRR Racing Tensioner
Here's a list of everything that we installed.
Boss330 Racing Long Block- Ford GT Aluminum Block, Manley I-Beams, Custom CP Pistons/Rings, ARP Hardware, Custom Heads by Chris@Champion, Custom cams spec'd by Al Papitto, Bronze valve guides, stainless valves, high lift springs and retainers, Innovators West 10% Overdrive Crank Pulley
Whipple 3.4L Crusher Kit with Whipple Throttle Body and Whipple CAI
American Racing Headers 1-7/8" Longtubes with 3" Offroad X-pipe
Magnaflow 3" Catback with Magnapack Mufflers
Lethal Performance Triple Pump Return Style Fuel System-Featuring Fore Precision Works Fuel Hat, Rails and Y-Blocks
Siemens Deka 80lb High Impedence Injectors
Fore Precision Works 8.8 Billet Differential Cover
Shelby Dual Pass Heat Exchanger by Revan Racing/C&R Racing
Reische Performance 170deg High Performance Thermostat
Moroso Intercooler Reservoir and Radiator Expansion Tank
Mcleod RXT Twin Disc Clutch kit with Steel Flywheel
Driveshaft Shop 3.5" Aluminum Driveshaft
BMR K-Member, Adjustable A-Arms, K-member support brace, Driveshaft loop
Steeda Complete Rear Drag Suspension- Competition Upper and Lower Control Arms, Panhard Rod, Panhard Brace, Torque Box Brace
Eibach Sportline Springs
QA1 Front Coil Over Kit with UPR Springs
QA1 Caster Camber Plates
QA1 Adjustable Rear Shocks
Steeda Tri-ax Shifter
Project 321 Coil Covers and Engine Bay Dress Up Kit
ThumpRRR Racing Tensioner
Last edited: