98 Laser Red Cobra Vert/ 1134 HP

sisky wolf

New Member
Established Member
Joined
Oct 15, 2008
Messages
261
Location
Manteca
Custom built 98 Cobra Vert 1134 HP

--------------------------------------------------------------------------------
Thi




Join Date: October 2008
Location: Manteca
Posts: 66
0.18 per day
Trader Rating: (0) Custom built 98 Cobra Vert 1134 HP

--------------------------------------------------------------------------------





Join Date: October 2008
Location: Manteca
Posts: 66
0.18 per day
Trader Rating: (0) Custom built 98 Cobra Vert 1134 HP

--------------------------------------------------------------------------------
Thinking about selling the Cobra..Now that I have done all that is needed to have a low 9 sec.pump gas street driven car. I will post a resume of the car later...right now the list is way too long pull off the top of my head..Just a brief...Motor built to handel 1500 Hp.. SCT Big Air MAF...SCT x CA2 Vortec "M" Race T-Trim ,capable of 26 lbs. boost, now pulling 17 lbs. boost MSD Dis4 ,Anderson Pwr. Pipe.Mac long tube headers,MMr Catch can. All new forged internals with stage 2 blower cams ported heads(322 intake..244 exhaust) Manley Billet I Beams,Manley Pistons,New special ground crank 20% stronger and 18% lighter than stock,all studs and bolts ARP,New built Oil pump hardened gears,10 qt. Canton oil pan with windage tray,Tremec t-56 Cobra r tranny with 26 spline input shaft with MGW shifter,Spec twin Disc clutch ..rated at 1400Hp,Quick time steel bell housing,Gregs alumiinum drive shaft,32 spline Mosher axels with c-clipeliminators 4.10 Eaton posi with metal clutch pacs,all suspension incul tublar K member and A frames,etc,5/8" studs for rear wheels battery cut off switch behind lic. plate drive shaft loop,Snow stage2 meth injection with dual nozzles Meth box hold 2 gal. 75% meth and 25% distilled water .Aeromotive A1000 fuel pump with 10 and 100 micron filters, 1/2 "steel braaided fuel line and 1/2" fuel rails..early Teksid block with 2001 intake and heads
Car dynoed with 500 miles on it ,break in oil and single nozzle injector for meth 851 rwhp and 670rwtq on a Mustang Dyno...now with 2700 miles on motor and synthetic oil and 2nd meth injector we expect 880 to 890 rwhp and 700 to 720 rwtq

New Lt wt. Procar racing seats with 5 way harnesses, (both driver and passanger)6 pt roll bar new carpetiing all gages necessary
Much more but I will lhave to get out the paper work to catch up ...Car is in excellent shape...always garaged and only seen rain a couple times

Would consider a offer of $25,000...no trades


Hickey_chico's Photobucket media
 
Last edited:

sisky wolf

New Member
Established Member
Joined
Oct 15, 2008
Messages
261
Location
Manteca
pictures

400494837110_0_BG1.jpg

305534837110_0_BG2.jpg

100_0566.jpg

100_0538.jpg

494534837110_0_BG1.jpg
 

94venomV8

Active Member
Established Member
Joined
Mar 18, 2006
Messages
2,702
Location
Iowa
Ok I am lost why does your add say 1134hp and then the graph above says built and tuned motor 1134hp but then the max power is only 850? I am not being a dick just curious is all. Very nice car as well. Could you do me a favor and PM me more details on the motor such as compression, heads, ect. Thanks alot
 

sisky wolf

New Member
Established Member
Joined
Oct 15, 2008
Messages
261
Location
Manteca
1134 is flywheel HP....851 rwhp....on orig tune with 500 miles and break in oil
We expect about 880 to 900 rwhp with the addition of the 2nd meth injector and synthetic oil..now have 3200 miles on motor 13 cc dished pistons,heads are new 2001 hand ported and flared valve seats(322 intake and 244 exhaust) at .500 lift. According to Tremec Engineers. the tremec t-56 Cobra R with hardended gears and 26 spline input shaft loses about 25% from flywheel to the tires. Every part in the motor was special ordered..nothing off the shelf.

Also Sub fram connectors,upper and lower control arme,6 pt. Strange adjustable shocks,Drive shaft loop,etc
 
Last edited:

sisky wolf

New Member
Established Member
Joined
Oct 15, 2008
Messages
261
Location
Manteca
I guess no interest...You couldn't beging to build this car for twice what I am asking..not counting the orig. cost of the car..I bought it brand new with 7 miles on the odometer
 
Last edited:

Users who are viewing this thread



Top