I have a 97 cobra engine wiring harness which is complete. It did have a MSD DIS4 so the coil connections have been professionally soldered/heat shrunk. It works 100% verified ok! Looking for sold
Next up, a lower engine harness Starter, oil pressure sending unit, etc off a 97 Cobra in good working verified condition. It is set up so it is standalone and grounds to the driver side ground point on the radiator support. $50
Finally, I have a LLX4 ECU out of the same 97 Cobra. Has a blow thru 80lb E85 turbo tune on it. Looking for $100
Next up, a lower engine harness Starter, oil pressure sending unit, etc off a 97 Cobra in good working verified condition. It is set up so it is standalone and grounds to the driver side ground point on the radiator support. $50
Finally, I have a LLX4 ECU out of the same 97 Cobra. Has a blow thru 80lb E85 turbo tune on it. Looking for $100
Last edited: