96 Cobra shell with some parts remaining

Poolman

Member
Established Member
Joined
Nov 11, 2009
Messages
208
Location
Pendleton, SC
96 Cobra shell with some parts remaining SOLD

SHELL AND REMAING PARTS SOLDI have a 96 Cobra parts car that has no drivetrain or suspension. It was a 50k mileage car and has a good SC title, came with with no engine/trans. I have everything I need from it. Look at the album attached, see if there is anything you might want. I have removed most of the interior and will put that up later. I have to do something with the body and don't want to take it to the crusher really.

ITEMS that are already gone that are in the pictures:
Hydroboost
master Cylinder
prop valve
H-Boost lines
Everything else pictured is still on the car.

ITEMS I KNOW ARE AVAILABLE: (some of this not pictured)
power steering rack
k-member
rear shocks
front and rear stock cobra brakes
front control arms and spindles
rear axle, solid 8.8, has some welded mods for torque arm and panhard bar, currently no diff installed, but have the diff, with 3.55's I think
stock rear axles
carpet
window motors and switches/wiring
power mirrors and switches/wiring
center console
trunk interior trim
stock spoiler
Cervinni side skirts and rocker trim, removed from car but available
and anything you see in the pictures.

NOT AVAILABLE
PCM
Interior wiring, hacked all up
seats
dash
steering column
steering wheel
cluster
pedals
anything not pictured

And of course you can take the whole body, if not too far I would bring it to you rather than send it to its doom. Chasis and body are very straight on the car, but was painted with a custom orange pearl paint.

I can't seem to keep the pictures right side up in photobucket, so sorry about that, new smart phone, not so new operator.

Orange 96 Cobra Photos by rdmccrary | Photobucket
 
Last edited:

Users who are viewing this thread



Top