96-04 cobra PTK Turbo kit

[ctdkid]

Hey guys I have a PTK turbo kit for sale that I picked up but later found out I cant use it. Didn't realize it wouldn't work with my MM kmember until I went to set it up. Looks like it was built around the QA1, UPR, and AJE kmembers. Kit doesn't have a mount for the wastegate or BOV. Will also need the coldside pipe connecting to the throttle body. Comes with Garrett GT4082 with no shaft play.

Will sell kit for $1400 shipped or $1200 local pick-up
Located in Thompson, CT

Need this gone make me an offer...

Call/text Sam 508-341-4715

Seperate:
Hotside-$800
Coldside-$500
Turbo-$600
Wastegate-$150

Hotside

I believe this is were the wastegate was mounted

Headers

Coldside

Garrett GT4082 50 trim A/R 0.94 no shaft play Part# 452232-5005

ON3PERFORMANCE 38mm Wastegate only mounted

 

[ctdkid]

Sunday Bump

 

[9CobraVert8]

Do you have any pics of when you had it mounted in the car?

 

[ctdkid]

I never had it mounted because it wouldn't fit with my kmember. The Maximum motorsports kmember has an extra brace where the motor mounts are. The headers point directly at the brace and the only way I would get it to work would be cut the braces out.

 

[9CobraVert8]

I never had it mounted because it wouldn't fit with my kmember. The Maximum motorsports kmember has an extra brace where the motor mounts are. The headers point directly at the brace and the only way I would get it to work would be cut the braces out.

Ahh ok now I understand. Do you know if the manifolds are meant to be used with or without p/s and AC?

Also do you have the V bands to connect the hot side all together?

 

[ctdkid]

Yes the kit was made to keep all accessories. I do not have any v-bands for it. You should be able to get good stainless v-bands for about $15 a piece.

 

[ctdkid]

Price reduction. Lots of interest. I know someone wants this.

Everything $1500 shipped/ $1300 local pick up

Hotside-700
Coldside-300
Turbo-500

Open to reasonable offers

 

[Gravik]

This fit 2v cars?

 

[ctdkid]

Everything will fit a 2v car except for the headers. They have the oval port not the round.

 

[Gravik]

is the cold side piping 3"?

 

[ctdkid]

Coldside is 2.5". PTK had a car making over 800hp with this setup.

 

[ctdkid]

Bump

 

[ctdkid]

Need this gone make me an offer...

 

[ctdkid]

TTT Price reduced