96-04 4V Garage Clean Out! Cobra, Mach 1, Mark VIII

SVT GI

Well-Known Member
Established Member
Joined
Feb 1, 2009
Messages
1,161
Location
San Antonio, TX
96-04 4V garage clean out. Prices do not include shipping. I’m not up to date on what all the parts go for so I’ll do my best. thanks.

Universal 96-04 4V:
ARP Main Stud kit for Iron blocks, brand new -SOLD
Complete 4V Timing Kit (MMR billet fully adjustable p/n 400067A) brand new -SOLD
Stock Cobra clutch cable -$25
Used timing kit from my 97 Cobra (30K miles) -$80
Oil pump from my 97 Cobra (30K miles) -$25
A/C delete pulley/bracket -SOLD
Mach 1 Intake- upper and lower -SOLD
Valve covers - SOLD
Mach 1 timing cover -SOLD
Teksid real main seal plate -SOLD
Lash Adjusters, 32 “new take-outs”, clean bill of health from head porter (Kris Starnes) -SOLD
Rockers, 32 “new take-outs”, clean bill of health from head porter (Kris Starnes) -SOLD
COPs less than 100 miles on them -SOLD
Motor mounts, stock 97 Cobra (30K miles) -$30
Wrist Pins, Manley .866" x 2.500" .150 wall p/n MAN-42230-8(used in sub 800hp) brand new -$40

03-04 Cobra:
Pulley bridge (28K miles) -$120
Alternator brackets -$100
Balancer (28K miles) -SOLD
Idler bracket (28K miles) -$60
H/E Hard lines (28K miles) -$80
FPDM x2 -$25 each
Pedal assembly, clutch and brake only -SOLD
misc vacuum and EGR parts (stuff on side of blower) -$60

96-98 Cobra:
8 bolt flywheel (2K miles) -SOLD
camshafts (30K miles) -SOLD
Front sway bar, barely used end links -$60
Strut tower brace -SOLD
LH Coil bracket -$60
Alternator bracket -$20
Vacuum and EGR assembly -$60
Fuel rail with accufab boost reference regulator -SOLD
Heads minus cams, includes lash adjusters/followers, springs (30K miles) -$150

All Mark VIII gone!

image_21.jpeg
[/URL][/IMG]
image_13.jpeg
[/URL][/IMG]
image_14.jpeg
[/URL][/IMG]
image_16.jpeg
[/URL][/IMG]
image_17.jpeg
[/URL][/IMG]
image_32.jpeg
[/URL][/IMG]
image_31.jpeg
[/URL][/IMG]
image_28.jpeg
[/URL][/IMG]
image_20.jpeg
[/URL][/IMG]
image_15.jpeg
[/URL][/IMG]
image_23.jpeg
[/URL][/IMG]
image_24.jpeg
[/URL][/IMG]
image_11.jpeg
[/URL][/IMG]
image_12.jpeg
[/URL][/IMG]
image_25.jpeg
[/URL][/IMG]
image_19.jpeg
[/URL][/IMG]
image_34.jpeg
[/URL][/IMG]
image_30.jpeg
[/URL][/IMG]
 
Last edited:

Mrpancho95

Member
Established Member
Joined
Feb 26, 2015
Messages
420
Location
Iowa
How much for the valve covers shipped to 50316?


Sent from my iPhone using Tapatalk
 

Mach828

Active Member
Established Member
Joined
Mar 21, 2010
Messages
1,417
Location
Albuquerque
Interested in:

- Crank (What is the condition on the crank?)
- Rocker arms (depending on mileage)
- Main stud kit (does it include the side bolts? Just the main stud kits direct from ARP is $101 shipped on Amazon)
 

SVT GI

Well-Known Member
Established Member
Joined
Feb 1, 2009
Messages
1,161
Location
San Antonio, TX
Interested in:

- Crank (What is the condition on the crank?)
- Rocker arms (depending on mileage)
- Main stud kit (does it include the side bolts? Just the main stud kits direct from ARP is $101 shipped on Amazon)

- Crank, don't know mileage. Pulled motor out f mark viii for the block. When I tore it down there wasn't anything abnormal and spun freely with very little effort in main caps with no rods/pistons. No scoring, but a polish is needed obviously. It would probably cost more to ship than what it's worth.

- I was told by head porter followers and LA's had less than 5K miles. Just upgraded to Ford GT stuff.

- Studs, side bolts are not included. No main stud kit I'm aware of sells with side bolts. I'll do $100 shipped for them.
 

DeltaElite121

New Member
Established Member
Joined
Dec 6, 2016
Messages
14
Bump for the OP. Met up with him locally to buy his short runner intake. Real honest guy.
 

Users who are viewing this thread



Top