A few have asked some questions about the build so I'll post up the build pics.
Roller.....
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2012-05-09
By tollroad at 2012-05-09
Thanks for checking it out. The engine is the stock short block, freshened up, rings , oil pump, etc. 120k Arp studs, Explorer intake, T-5. DD it now and plans to do a engine build later this year.
Rear end is a 8.8, welded tubes and 9" big bearing ends, eaton carrier and Moser axles, 31 spline. 3:55's, with a wilwood rear disc set-up and E brake.
Front are 96 Gt spindles/brakes. ( want to upgrade to cobra brakes) and a Steeda x2 bumpsteer kit. Ford racing "C" springs and tokico blues. ( Planning to go aftermarket K member and coilovers.)
Saleen 18x9's. Hoping to put a T56 in it or a built 4r70W, we'll see.
Thanks guys.
Roller.....
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2011-08-16
By tollroad at 2012-05-09
By tollroad at 2012-05-09
Thanks for checking it out. The engine is the stock short block, freshened up, rings , oil pump, etc. 120k Arp studs, Explorer intake, T-5. DD it now and plans to do a engine build later this year.
Rear end is a 8.8, welded tubes and 9" big bearing ends, eaton carrier and Moser axles, 31 spline. 3:55's, with a wilwood rear disc set-up and E brake.
Front are 96 Gt spindles/brakes. ( want to upgrade to cobra brakes) and a Steeda x2 bumpsteer kit. Ford racing "C" springs and tokico blues. ( Planning to go aftermarket K member and coilovers.)
Saleen 18x9's. Hoping to put a T56 in it or a built 4r70W, we'll see.
Thanks guys.
Last edited: