90 Coupe
- Thread starter Mongoose 03
- Start date
seen it in person its a nice car, if it was FI it would be sold lol
May take reasonable offers
Price Reduced
$13,000
Zero rust....even underneath
No winters and always garaged and covered
You'd be hard pressed to find a nicer Coupe
$13,000
Zero rust....even underneath
No winters and always garaged and covered
You'd be hard pressed to find a nicer Coupe
Will run 11.20s all day long on just the motor. Pump gas, full interior, no cage, good street manners.
compression ratio?
10.75 to 1
Still for sale ?
Still for sale and ready for street or strip 937-572-4623
Price firm?
Can't go lower than 13k....you'd know why if you seen the Coupe in person :banana:
A few items off the top of my head...Motor and suspension professionally built and tuned by Mike Bell
1 327 Sportsman block w/ Probe forged steel crank
2 Probe 11:1 race pistons, lightweight I beam rods
3 TrickFlow Twisted wedge 185cc CNC ported heads w/ titanium retainers
4 Lunati custom cam with Trickflow 1:7 roller rockers, cam card
5 MSD ignition AL2 w/ 2 step, rev control, remote timing adjust
6 Black Magic electric fan, aluminum radiator, catch can
7 BBK full length 1 ¾” headers, BBK Shorty X with Flowmaster Super 40’s
9 Tremic 3550, Pro 5.0, Centerforce dual friction
10 FMC aluminum drive shaft
11 Holley 750 HP carb w/ SuperVictor intake
12 430 gear, 31 spline Mosier, gun drilled, spool, Trickflow cover
13 Metco adjustable upper and lower control arms, Swar bar, anti roll bar
14 Strange 10 way adjustable shocks....front and rear
15 Solid motor mounts, polyurethane tranny mount and bushings
16 UPR chrome molly tubular K-Member kit w/ a arms
17 Holly black fuel pump
18 Line lock
19 HO Fibertrends 3” Cowl induction hood
20 M/T slicks and skinnies...BFG's for street in rear
21 150 HP NOS plate system with auto bottle heater
Frank 937-572-4623
1 327 Sportsman block w/ Probe forged steel crank
2 Probe 11:1 race pistons, lightweight I beam rods
3 TrickFlow Twisted wedge 185cc CNC ported heads w/ titanium retainers
4 Lunati custom cam with Trickflow 1:7 roller rockers, cam card
5 MSD ignition AL2 w/ 2 step, rev control, remote timing adjust
6 Black Magic electric fan, aluminum radiator, catch can
7 BBK full length 1 ¾” headers, BBK Shorty X with Flowmaster Super 40’s
9 Tremic 3550, Pro 5.0, Centerforce dual friction
10 FMC aluminum drive shaft
11 Holley 750 HP carb w/ SuperVictor intake
12 430 gear, 31 spline Mosier, gun drilled, spool, Trickflow cover
13 Metco adjustable upper and lower control arms, Swar bar, anti roll bar
14 Strange 10 way adjustable shocks....front and rear
15 Solid motor mounts, polyurethane tranny mount and bushings
16 UPR chrome molly tubular K-Member kit w/ a arms
17 Holly black fuel pump
18 Line lock
19 HO Fibertrends 3” Cowl induction hood
20 M/T slicks and skinnies...BFG's for street in rear
21 150 HP NOS plate system with auto bottle heater
Frank 937-572-4623
Damn, too bad you don't take trades. I'm trying to convince myself to sell/trade my supercharged 96 cobra vert with low miles for a street/strip toy. A guy has talked me down to $13k but I just can't make myself do it, yet.
Users who are viewing this thread
