car has been a great car and very fun. has over 14k in motor mods. have reciepts for evething done. car was built in cali by california street machine. currently has 175k miles on chassis and approx 40k on stroker build. currently has light hail damage but can be fixed by simply a pdr job. just ordered new window moldings new hood cowl and new hood moldings. windshield has a crack and it will also be replaced. interior passenger seat has rip and guage bezel is busted off in the back. this is a full power car including driver seat with lumbar. car does not have a/c but heater works really well. heres is the mod list with pics...
www.CaliforniaStreetMachine.com Built, balanced, & blue printed 325 stroker 10.5:1 compression
*Eagle 4340 crank
*Eagle H-beam rods
*JE/SRP pistons
*Steel main girdle
*All ARP fasteners thruout.
*Preluber system (prevents dry starts)
*ATI damper
*Moroso Road Race 7qt pan
*BBK CAI with C&L 76mm TrueFlow
*BBK 70mm TB & EGR
*RPM II intake
*Kirban billet fuel pressure regulator
*FMS 30lb injectors
*AFR 165 heads
*COMP Pro Magnum 1.7 roller rockers
*FMS hardened pushrods
*FMS lifters
*FMS E303 cam
*CSM Billet fabricated valve covers
*BBK ceramic coated shorty headers
*Magnaflow X-pipe with high flow cats
*Flowmaster 2 chambers
IGNITION/ELECTRONICS:
*Optima Red Top battery
*PA Performance 130 amp alternator
*PA Performance high torque mini starter
*MSD billet distributor
*MSD coil
*MSD wires
*MaximumMotorsports camber/caster plates
*H&R Race springs
*Koni struts & shocks (Reds)
*MaximumMotorsports pan-hard bar
*MaximumMotorsports lower control arms
*FMS upper control arms
*Welded in tubular subframe connectors
*Chrome Cobras are clean with good Nitto tires.
COOLING:
*Flex-a-lite dual 12" electric fans (with auto or manual on switch)
*Fluidyne polished aluminum radiator
*Edelbrock waterpump
*Steeda radiator hold down bracket
*FMS blue hose kit
TRANS/DRIVELINE:
*Tremec TKO 500
*Short throw shifter
*Centerforce dual-friction clutch
*FMS billet flywheel
*FMS aluminum driveshaft
REAR END:
*Auburn Posi
*FMS 3.55 gears
*Moser 31 spline forged axles
*SVO Billet girdle
6800 takes it. thanks contact me at 8502597031 or [email protected]
www.CaliforniaStreetMachine.com Built, balanced, & blue printed 325 stroker 10.5:1 compression
*Eagle 4340 crank
*Eagle H-beam rods
*JE/SRP pistons
*Steel main girdle
*All ARP fasteners thruout.
*Preluber system (prevents dry starts)
*ATI damper
*Moroso Road Race 7qt pan
*BBK CAI with C&L 76mm TrueFlow
*BBK 70mm TB & EGR
*RPM II intake
*Kirban billet fuel pressure regulator
*FMS 30lb injectors
*AFR 165 heads
*COMP Pro Magnum 1.7 roller rockers
*FMS hardened pushrods
*FMS lifters
*FMS E303 cam
*CSM Billet fabricated valve covers
*BBK ceramic coated shorty headers
*Magnaflow X-pipe with high flow cats
*Flowmaster 2 chambers
IGNITION/ELECTRONICS:
*Optima Red Top battery
*PA Performance 130 amp alternator
*PA Performance high torque mini starter
*MSD billet distributor
*MSD coil
*MSD wires
*MaximumMotorsports camber/caster plates
*H&R Race springs
*Koni struts & shocks (Reds)
*MaximumMotorsports pan-hard bar
*MaximumMotorsports lower control arms
*FMS upper control arms
*Welded in tubular subframe connectors
*Chrome Cobras are clean with good Nitto tires.
COOLING:
*Flex-a-lite dual 12" electric fans (with auto or manual on switch)
*Fluidyne polished aluminum radiator
*Edelbrock waterpump
*Steeda radiator hold down bracket
*FMS blue hose kit
TRANS/DRIVELINE:
*Tremec TKO 500
*Short throw shifter
*Centerforce dual-friction clutch
*FMS billet flywheel
*FMS aluminum driveshaft
REAR END:
*Auburn Posi
*FMS 3.55 gears
*Moser 31 spline forged axles
*SVO Billet girdle
6800 takes it. thanks contact me at 8502597031 or [email protected]
