88mm Turbo 03 Cobra Drag car

eleanordream

New Member
Established Member
Joined
Sep 18, 2006
Messages
166
Location
Texas
Testing waters on selling my 03 Cobra drag car. A buddy and I built two Identical cars. I have no time for drag racing anymore so she needs to go.
Please remember this is a Race Car, it was built with one idea, go fast from A to B. If it isn't required to go fast or it adds needless weight it's not here. Looking for Built C5 and newer Vette or GT500's. Must be street Car. Not looking for drag cars.

Engine and Turbo Setup:
03 4.6 DOHC Built by Strictly Perfomance
ported and polished heads,
Car has Precision 88mm billet turbo with 5" Downpipe
sullivan intake with sheet metal elbow
90mm accufab TB
JE pistons,
120lb injectors
Remote oil filter setup
Noribuilt Forward facing headers,
60mm JGS gate
60mm Prescion BOV,
Ams-1000 boost controler with Graphing
Vair on board air system for air supply to Boost controller (no filling CO2 bottles)
air/water intercooler
Remote oil filter setup
Alluminum Radiator
Meizere electric Water Pump

Tranny:
Turbo 400 with Transbrake
Hurst Shifter

Electronics:
Big stuff 3 with racepak interface and internal data logging,
Racepak dash with logging,
Racepak Boost Sensor
Racepak oil psi sensor
LS1 Coils mounted on Powergrid plates
Ams-1000 boost controller
Vair on board air system for air supply to Boost controller (no filling CO2 bottles)
weldon fuel pump.
Emeregency Remote Electrical System Shutdown System with Button on Cage
Full Painless Wiring setup. Needs larger alternator wiring and main power cable.
dual optima batteries


Chassis:
MiniTubbed rear
upr upper and lower adjustables in rear
full upr coilover front suspension
Champion Magnum style double beadlock wheels on rear, 29x10.5w rear tire
5/8 rear studs
solid axle with coilovers and 9"ends
35 spline axles and spool
3:55 gears
wishbone locator
8.50 cage. through the floor subframe connectors.
Chisled Performance fuel cell and water tank combo with Rule Water pump
FR manual rack
Schoneck Fiberglass Dask with Dzus Fastners
VFN Cajun style Hood with dzus fastners
3" Driveshaft with 1350 U-Joints and Strange yoke
Skinny Kids Paracute System with stroud chute
Stroud Window Net
Kirkey race seat with red cover
Removable Steering Wheel
Strange Front Brakes
Strange Manual Brake Booster
Wilwood Rear brakes
Racecraft steering shaft assembly

There is more details but this is majority of it.
Just wanting to see if anyone might be interested. $35k negotiable

eleanordream's Library | Photobucket

eleanordream's Library | Photobucket

IMG_2426_zps42bb39a4.jpg
IMG_2423_zps443bc512.jpg
IMG_2422_zpsbdf108f0.jpg
IMG_2421_zps14dc61e4.jpg
IMG_2420_zpsc0803a69.jpg
 
Last edited:

02SVTV6

Active Member
Established Member
Joined
Apr 21, 2007
Messages
1,879
Location
Florida
Thought about selling mine for a GT500 but just idk. Bump for u If u can get anywhere near 30
 

eleanordream

New Member
Established Member
Joined
Sep 18, 2006
Messages
166
Location
Texas
I added more details as well as cleaned it up some in the description. Pics should be accesible now as well.
 

eleanordream

New Member
Established Member
Joined
Sep 18, 2006
Messages
166
Location
Texas
Comparable cars with power vs weight should roll low 8.0s. I just finished the build on it so no track runs yet. I believe Triangle speed went 7.7s off the trailer two weeks ago with there 88 setup. The twin car to this one made 1000rwhp and 1100 tq without a billet wheel turbo. It could be street able with some turn signal wiring and switches. Headlights and brake lights work. No horn.
 

eleanordream

New Member
Established Member
Joined
Sep 18, 2006
Messages
166
Location
Texas
she is still for sale guys, my buddy that owns a dealership has the car im wanting sitting on the lot. the beast needs to go..
 

Users who are viewing this thread



Top