Selling as a roller. Car is a very clean and straight bodied white coupe. Cobra13 did all the chassis work. 4340 chromoly 10pt tig welded, wolfe single adjustable anti-roll bar, skinny kid low pro wing, welded in detatchable chute mount, scott rod fab inner sheet metal fenders welded in still needs paint, engine bay welded up coated with self etching primer for now, stock 8.8 with 4.10's and stock fron k-member, new weld draglites with M/T drag radials (80-90% tread). car is lowered and sits right. Solid and no corners cut! asking $5500
9.5 deck dart iron eagle 4.125 block part #31385235 w/ cam bearings NEW DART SBF Iron Eagle Race Block, 351/9.5 Deck, 4.125 Bore [31385235] : AD Performance, Your Source for Longblock Performance Parts
Paid $2650 Asking $2300
TFS TEA 240CC Fully ported high ports NEW Paid $2843.48 Asking $2600
Danny Bee belt drive 351W: NEW Paid $700 Asking $650
Crower stainless shaft mount rockers 1.7/1.65 NEW Paid $1100 Asking $1000
Diamond 23cc dish 4.125 ceramic coated w/10 hole gas port machine for .927 pin NEW Paid $1511.xx Asking $1400
Bullet racing custom grind solid roller .730 lift NEW Paid $389 Asking $300
Weldon 2345a USED Paid $750 Asking $600
Callies Magnum 3.900 stroke crank NEW Paid $1599.00 Asking $1500 CNC-Motorsports.com is your resource for High Quality, Hi-Performance auto parts from industry names you trust. Callies Magnum Small Block Ford Crankshaft, 3.900 stroke, 351C mains 2.750, 2.100 rod journal
Oliver billet parabolic I-beam rods 6.250 .927 NEW Paid $1249 Asking $1200 Oliver Billet 6.250 I-beam Rods, 2.10 Pin, .927 [oliver_6250_speedway] : AD Performance, Your Source for Longblock Performance Parts
Full fuel system w/o injectors mix/match between aeromotive and magnafuel regs and guages. (will get more info and pics) Paid $800 Asking $500
Super victor 351 with welded bungs ported w/rails by XSR NEW Paid $650 Asking $450
F1-R 5.0 ratio serial #: 23598 Procharger 12 rib big red BOV Kit w/brackets, pulleys for 8.2 deck sbf (USED IN NEW COND)
comes with extra belt and pullies. Paid $3800 Asking $3500
Procharger 1000hp rated air to air FMIC USED (slightly bent pipe on lower pipe) Asking $400
Fast classic sequential & data logger w/ gm style plugs USED Paid $1200 Asking $1100
Built JW TH400 w/jw ultra bell (will get info on trans and pics when I get home this weekend) NEW Paid $2000 Asking $1800
JW "The Wheel" flexplate 157th neutral balance NEW
dont mind the pump, its not for sale $150
JW 1/2in tabbed steel stator 2800 tight stall T/C for th400 NEW
Paid $900 Asking $700
Centerline convo pros rears on 26x10.50's slicks USED $200
If sold together:
Car w/all parts 20k
Motor parts 11k (block,heads,pistons,crank,rods,cam,rockers,intake,rails)
I understand there is some info missing here and that you guys will have questions. JUST ASK!!! I will do my best 2400 miles from home as I do not have everything in front of me. ALL PRICES ARE OBO!!! PLEASE REPLY HERE, PM ME, OR EMAIL ME AT [email protected]. I'm out of country till Saturday the 15th of Oct and will be able to get pics up next week if requested. DO NOT TEXT ME IF YOU HAVE MY NUMBER! I WILL NOT ANSWER OUT OF COUNRTY. Thanks Brandon
9.5 deck dart iron eagle 4.125 block part #31385235 w/ cam bearings NEW DART SBF Iron Eagle Race Block, 351/9.5 Deck, 4.125 Bore [31385235] : AD Performance, Your Source for Longblock Performance Parts
Paid $2650 Asking $2300
TFS TEA 240CC Fully ported high ports NEW Paid $2843.48 Asking $2600
Danny Bee belt drive 351W: NEW Paid $700 Asking $650
Crower stainless shaft mount rockers 1.7/1.65 NEW Paid $1100 Asking $1000
Diamond 23cc dish 4.125 ceramic coated w/10 hole gas port machine for .927 pin NEW Paid $1511.xx Asking $1400
Bullet racing custom grind solid roller .730 lift NEW Paid $389 Asking $300
Weldon 2345a USED Paid $750 Asking $600
Callies Magnum 3.900 stroke crank NEW Paid $1599.00 Asking $1500 CNC-Motorsports.com is your resource for High Quality, Hi-Performance auto parts from industry names you trust. Callies Magnum Small Block Ford Crankshaft, 3.900 stroke, 351C mains 2.750, 2.100 rod journal
Oliver billet parabolic I-beam rods 6.250 .927 NEW Paid $1249 Asking $1200 Oliver Billet 6.250 I-beam Rods, 2.10 Pin, .927 [oliver_6250_speedway] : AD Performance, Your Source for Longblock Performance Parts
Full fuel system w/o injectors mix/match between aeromotive and magnafuel regs and guages. (will get more info and pics) Paid $800 Asking $500
Super victor 351 with welded bungs ported w/rails by XSR NEW Paid $650 Asking $450
F1-R 5.0 ratio serial #: 23598 Procharger 12 rib big red BOV Kit w/brackets, pulleys for 8.2 deck sbf (USED IN NEW COND)
comes with extra belt and pullies. Paid $3800 Asking $3500
Procharger 1000hp rated air to air FMIC USED (slightly bent pipe on lower pipe) Asking $400
Fast classic sequential & data logger w/ gm style plugs USED Paid $1200 Asking $1100
Built JW TH400 w/jw ultra bell (will get info on trans and pics when I get home this weekend) NEW Paid $2000 Asking $1800
JW "The Wheel" flexplate 157th neutral balance NEW
dont mind the pump, its not for sale $150
JW 1/2in tabbed steel stator 2800 tight stall T/C for th400 NEW
Paid $900 Asking $700
Centerline convo pros rears on 26x10.50's slicks USED $200
If sold together:
Car w/all parts 20k
Motor parts 11k (block,heads,pistons,crank,rods,cam,rockers,intake,rails)
I understand there is some info missing here and that you guys will have questions. JUST ASK!!! I will do my best 2400 miles from home as I do not have everything in front of me. ALL PRICES ARE OBO!!! PLEASE REPLY HERE, PM ME, OR EMAIL ME AT [email protected]. I'm out of country till Saturday the 15th of Oct and will be able to get pics up next week if requested. DO NOT TEXT ME IF YOU HAVE MY NUMBER! I WILL NOT ANSWER OUT OF COUNRTY. Thanks Brandon
