Decided to sell my 87 Notch Turbo Coupe, car has seen no track time after this engine build only 6 passes on the dyno for tuning, serious buyers only...IM me or call me at 786-299-4692 ask for Mario, asking price is 25,000
1987 Mustang Coupes Specs 2
Dart 8.2 Deck Block 368 CI
· Full Machine work - zero decked, line honed, full custom machine work 4.155 bore etc.
-Billet Caps
-Coated Cam, Rod and Crank Bearing
-Scat 3.4 Stroke Crank ( 28 oz )
Scat 5.4 H beam Rods ARP 2000 Bolts
-Custom Built Ross Pistons for Inline Valve Head SEVERE DUTY( 2.14 relief ) special coated tops and skirts, slight dish, tool steel .927 pin ( $ 1800 alone )
·-Total Seal Stainless ring pack with Napier second ring
-Coated Canton Oil Pan with oil return bung welded in
-Custom Oil Pump
-Brand New Jesel Belt
-Custom Ground Billet Core Solid Roller Turbo Cam grind by Ronnie Crawford. Cam specs duration intake 264 exhaust 256 lift intake 726 exhaust 706
·
-Brand New Isky Red Zone Solid Lifters with the EZ Wheel option ( 1200 alone out of summit )
-Custom Length Manton Pushrods
-Cometic Head Gaskets
-ATI ProDrag Balancer
-Billet Timing Pointer
-ARP Studs everywhere
-Brodix Track 1 CNC 227's (max effort) ( castings are used, all parts are brand new )
-Del West Titanium 2.10 Intake Valve
-Del West Inconel Exhaust Valves 1.64
-Titanium Retainers and keepers
-PSI Triple Springs with Locaters
-330's intake 238's exhaust
-Harland Sharp Shaft Mount Rockers (1.7 Ratio)
-Manton Custom .120 wall pushrods
-RARE Original Australian Parker Funnel Web intake
-Fully ported
-Ceramic Coated
-Converted to EFI by Wilson
-Custom Built Sheet Metal Elbow to fit under OEM Fox hood with stock motor mounts
-Ceramic Coated 1/2'' Fuel Rails
-Custom built by CG Fabrication Turbo headers and hot side, powder coated ($2200.00) and Custom built cold side piping and welding of radiator and crank trigger, John $1600.00.
· High Polished Mezier Waterpump for Jesel Belt Drive
-Custom Built Moroso Low Profile Sheet Metal Valve Covers ( clear all shaft mount rockers )
-Wilson 90mm Throttle Body
-NGK #9 Plugs
-Moroso Super 40 wires
· Custom Grind Cam by Ronnie Crawford
· Flex A Lite Twin fans
· New Motor solid Mounts (Racecraft)
· Bumper support
· 160 lbs Injectors:
· Waste gate and blow off flange from Racecraft
· Proportioning valve and lines
· Flamming River manual steering rack
· Bump steer adjusters:
· Rear end spherical bushing
· Moser Spool and C Clip eliminators and labor
· 31 Spline Moser axles
· UPR Anti roll bar
· Spool
· FAST XFI box 30100
· FAST Dash
· FAST Crank Trigger
· FAST Main wiring harness (FST-301100)
· FAST Injector harness EV1 4.6, 5.0, 5.4, 5.8L, EV1 injectors (COMP Cams 301203)
· FAST Electrical Wiring harness FAST IPU (FAST 301300)
· FAST Idle Air control valve (FAST 307014)
· FAST Idle Air Control adapter (FAST 307022)
· MSD Billet Distributor, Magnetic trigger, mechanical advance (MSD Ignition 8582)
· FAST Harness Fan and Fuel pump kit (FAST 301406)
· FAST Sensor Kit (FAST 307051)
· FAST sensor 0-100 PSI Pressure FAST (FAST 307062)
· Oxygen sensor NTK NGK 24302
· AMS 1000 Boost controller, pressure switch with CO2 tank and system with wires and gauges
· Glenn Performance Y Blocks:
· Aeromotive Fuel Tank Sump, Steel, Baffled, 12 inc.x12 inch.x12 inch, Steel bung
· Chiseled Intercooler
· Intake parts, clamps, T bolts, elbows
· Intake hoses
· MSD 7Al-2 Plus Ignition Box:
· MSD HVC II Coil
· MSD distributor gear
· Exhaust Gaskets 375-1487 from Jegs and Aerospace Components Mustang manual brake kit
· Garret 88mm ball bearing Turbo
· Turbo cover
· 275x60x15 Mickey Thompson Drag Radials
· ATF Powerglide with transbrake and Cheetah shifter
· MSD three Step launch control
· Hurst Line lock
· Exhaust
· Tail 60mm Wastegate
· Weldon 2345 Fuel Pump
· Weldon Pump Controller:
· Weldon Regulator:
· Relay boxes
· Data Wiring Panel
· Switch box panels:
· Misc wires:
· Steeda Urethane Adjustable Upper Control Arms with Urethane Bushing for rear.
· Lower Control Arms (Aluminum).
· Welded sub frame connectors.
· Heavy duty lower torque boxes
· QA1 K Member
· QA1 A Arm
· Steeda coil over kit
· Steeda Springs
· Strange Struts adjustable shocks, front and rear
· T/A rear end Girdle
· Battery relocation kit
· Six point chrome molly six point cage with swing out (AC Carcraft)
· Aerospace 4 caliper brakes front and rear
· Billet Specialties front and rear wheels (rear 15X10 and front 15X4)
· Dyno Tune at TD Autoworks by Willie Figueroa made 954 RWHP and 761 RWTQ on a very safe tune.
1987 Mustang Coupes Specs 2
Dart 8.2 Deck Block 368 CI
· Full Machine work - zero decked, line honed, full custom machine work 4.155 bore etc.
-Billet Caps
-Coated Cam, Rod and Crank Bearing
-Scat 3.4 Stroke Crank ( 28 oz )
Scat 5.4 H beam Rods ARP 2000 Bolts
-Custom Built Ross Pistons for Inline Valve Head SEVERE DUTY( 2.14 relief ) special coated tops and skirts, slight dish, tool steel .927 pin ( $ 1800 alone )
·-Total Seal Stainless ring pack with Napier second ring
-Coated Canton Oil Pan with oil return bung welded in
-Custom Oil Pump
-Brand New Jesel Belt
-Custom Ground Billet Core Solid Roller Turbo Cam grind by Ronnie Crawford. Cam specs duration intake 264 exhaust 256 lift intake 726 exhaust 706
·
-Brand New Isky Red Zone Solid Lifters with the EZ Wheel option ( 1200 alone out of summit )
-Custom Length Manton Pushrods
-Cometic Head Gaskets
-ATI ProDrag Balancer
-Billet Timing Pointer
-ARP Studs everywhere
-Brodix Track 1 CNC 227's (max effort) ( castings are used, all parts are brand new )
-Del West Titanium 2.10 Intake Valve
-Del West Inconel Exhaust Valves 1.64
-Titanium Retainers and keepers
-PSI Triple Springs with Locaters
-330's intake 238's exhaust
-Harland Sharp Shaft Mount Rockers (1.7 Ratio)
-Manton Custom .120 wall pushrods
-RARE Original Australian Parker Funnel Web intake
-Fully ported
-Ceramic Coated
-Converted to EFI by Wilson
-Custom Built Sheet Metal Elbow to fit under OEM Fox hood with stock motor mounts
-Ceramic Coated 1/2'' Fuel Rails
-Custom built by CG Fabrication Turbo headers and hot side, powder coated ($2200.00) and Custom built cold side piping and welding of radiator and crank trigger, John $1600.00.
· High Polished Mezier Waterpump for Jesel Belt Drive
-Custom Built Moroso Low Profile Sheet Metal Valve Covers ( clear all shaft mount rockers )
-Wilson 90mm Throttle Body
-NGK #9 Plugs
-Moroso Super 40 wires
· Custom Grind Cam by Ronnie Crawford
· Flex A Lite Twin fans
· New Motor solid Mounts (Racecraft)
· Bumper support
· 160 lbs Injectors:
· Waste gate and blow off flange from Racecraft
· Proportioning valve and lines
· Flamming River manual steering rack
· Bump steer adjusters:
· Rear end spherical bushing
· Moser Spool and C Clip eliminators and labor
· 31 Spline Moser axles
· UPR Anti roll bar
· Spool
· FAST XFI box 30100
· FAST Dash
· FAST Crank Trigger
· FAST Main wiring harness (FST-301100)
· FAST Injector harness EV1 4.6, 5.0, 5.4, 5.8L, EV1 injectors (COMP Cams 301203)
· FAST Electrical Wiring harness FAST IPU (FAST 301300)
· FAST Idle Air control valve (FAST 307014)
· FAST Idle Air Control adapter (FAST 307022)
· MSD Billet Distributor, Magnetic trigger, mechanical advance (MSD Ignition 8582)
· FAST Harness Fan and Fuel pump kit (FAST 301406)
· FAST Sensor Kit (FAST 307051)
· FAST sensor 0-100 PSI Pressure FAST (FAST 307062)
· Oxygen sensor NTK NGK 24302
· AMS 1000 Boost controller, pressure switch with CO2 tank and system with wires and gauges
· Glenn Performance Y Blocks:
· Aeromotive Fuel Tank Sump, Steel, Baffled, 12 inc.x12 inch.x12 inch, Steel bung
· Chiseled Intercooler
· Intake parts, clamps, T bolts, elbows
· Intake hoses
· MSD 7Al-2 Plus Ignition Box:
· MSD HVC II Coil
· MSD distributor gear
· Exhaust Gaskets 375-1487 from Jegs and Aerospace Components Mustang manual brake kit
· Garret 88mm ball bearing Turbo
· Turbo cover
· 275x60x15 Mickey Thompson Drag Radials
· ATF Powerglide with transbrake and Cheetah shifter
· MSD three Step launch control
· Hurst Line lock
· Exhaust
· Tail 60mm Wastegate
· Weldon 2345 Fuel Pump
· Weldon Pump Controller:
· Weldon Regulator:
· Relay boxes
· Data Wiring Panel
· Switch box panels:
· Misc wires:
· Steeda Urethane Adjustable Upper Control Arms with Urethane Bushing for rear.
· Lower Control Arms (Aluminum).
· Welded sub frame connectors.
· Heavy duty lower torque boxes
· QA1 K Member
· QA1 A Arm
· Steeda coil over kit
· Steeda Springs
· Strange Struts adjustable shocks, front and rear
· T/A rear end Girdle
· Battery relocation kit
· Six point chrome molly six point cage with swing out (AC Carcraft)
· Aerospace 4 caliper brakes front and rear
· Billet Specialties front and rear wheels (rear 15X10 and front 15X4)
· Dyno Tune at TD Autoworks by Willie Figueroa made 954 RWHP and 761 RWTQ on a very safe tune.
