660rwhp 2.8H KB Built Saleen

Apicia

Active Member
Established Member
Joined
Jul 8, 2007
Messages
1,426
Location
MA
Just throwing it out there for trade or sale. Completely finished, 660rwhp, and turn key. The built short block is bulletproof, MPH heads and blower cams flow well and allow for added boost, 2.8H Kenne Bell provides 24psi of boost, AFCO H/E, D&D T56 Viper Spec 6-speed, aluminum balanced DS, built rearend with 3.73s, aluminum upper and lower control arms, coated LTs, both catted and non-catted H-pipes, methanol injection, and the list goes on and on. It just does not get any better for anyone that wants a built new edge Mustang that looks gorgeous. You would save tons of money not building this car yourself. Seriously, look at the list. This Saleen is a street car. No cages or race seats. This car is the real deal and cost well over 60k to complete! Very CLEAN.

25k obo.

038.gif


042.gif


[nomedia="http://www.youtube.com/watch?v=GqlsB7AoKg4"]YouTube - 660rwhp Saleen Street Car[/nomedia]


[nomedia="http://www.youtube.com/watch?v=c3cZ0l9Bohw&feature=related"]YouTube - Saleen Mustang Kenne Bell 2.8H dyno video.[/nomedia]


Year: 2001
Make: Ford
Model: S281 SC Saleen
Body Style: Coupe
Color: Black
Mileage: 39,890
Engine: Forged 4.6L 2V SOHC V8
Transmission: 6-Speed Manual
Power Adder: Kenne Bell 2.8H
RWHP: 658.28
RWTQ: 607.95

Forged Longblock:
PK Machine Built Forged Shortblock
Compression Ratio 9.3:1
Diamond Forged Notched Dish Pistons
Manley H-Beam Connecting Rods
Forged Cobra Crank
Line Honed with Deck Plate
Balanced Rotating Assembly
MPH Stage 2.5 Heads
Custom Ground Blower Cams
Stainless Valves
Bronze Guides
Comp Springs
Billet Oil Pump
3-Bolt Tensioner Timing Cover
Mobil 1 Synthetic Oil and Filter

Power Adder and Intake Modifications:
Kenne Bell 2.8H Intercooled Supercharger Kit (24 psi)
Billetflow 3.1" Supercharger Pulley and Hub
AFCO Pro Series Heat Exchanger
03/04 Cobra Heat Exchanger Mounting Brackets
JLT Cold Air Intake
SCT BA-2400 Mass Air Flow Sensor
Bosch Intercooler Pump
Kenne Bell Single Blade Throttle Body (Accufab)
GI Joe Gripper Plate
Cloves Idler Pulleys
8-Rib Pulley Upgrade
Billet 3-Bolt Belt Tensioner
Gates 8-Rib Belt
Black Billet Oil Catch Can

Fuel and Spark Modifications:
Alky Control Methanol Injection with Progressive Controller (PAC) for 100% Methanol
MSD 2V Coil On Plugs Kit
NGK TR7IX Spark Plugs
Ford Racing 60lb Fuel Injectors
Mallory Comp Fuel Filter
Fore Billet Fuel Hat
SVT Cobra Fuel Tank
Dual GT Fuel Pumps
Upgraded Fuel Line
Kenne Bell Boost-a-Pump 40a
CPR Aluminum Fuel Rails

Exhaust and Drivetrain Modifications:
BBK Coated Longtube Headers
BBK Catted H-Pipe for Longtube Headers
Saleen Performance Catback by Borla
Dynotune Custom Balanced Aluminum Driveshaft
31-Spline Trac-Lok Differential
Moser 31-Spline Axles
Ford Racing 3.73:1 Ring Gear and Pinion Set
Saleen Aluminum 8.8 Differential Cover
D&D T56 Transmission Conversion
26-Spline Input Shaft
Spec Stage 2+ Clutch Kit
Spec Aluminum Flywheel
Steeda Tri-Ax Shifter
Steeda Aluminum Quadrant
Steeda Aluminum Firewall Adjuster
LDC Free Play Kit

Chassis, Brake, and Suspension Modifications:
Steeda Upper Aluminum Control Arms
Steeda Lower Aluminum Control Arms
Maximum Motorsports Solid Motor Mounts
Maximum Motorsports Solid Transmission Mount
UPR 4-Bolt Caster Camber Plates
Hawk Performance Brake Pads Front and Rear
Slotted Brembo Rotors Front and Rear
Welded Full Length Subframe Connectors

Other Modifications:
Cervinis 95 Style Cobra R Hood
Custom Dyno Tune with SCT X3 Power Flash Device
SLP Line Lock
AEM Wideband 02 UEGO Gauge/Sensor
Auto Meter Steering Column Pod
Auto Meter Phantom Boost/Vacuum Gauge
Auto Meter Phantom Fuel Pressure Gauge
Clear Smoked Headlights
Mach 1 Grill Delete Kit
Black Billet Shorty Antenna
Tinted Windows
Saleen Rear Bumper Inserts
Saleen Black Oval Rear Deck Emblem
Leather SVT Cobra 6-speed Shift Knob
Genuine Ford Stainless 03/04 Cobra Pedals
Redline Tuning Hood Struts
Genuine Ford Locking Gas Cap
18x9 Black Cobra 95 Front Wheels
18x10 Black Cobra 95 Rear Wheels
265/35/18 BF Goodrich KDW NT Front Tires
315/30/18 Mickey Thompson ET Street Drag Radials
Gorilla Wheel Installation Kit / Chrome
Chrome Aluminum Center Caps
Tinted Tail Light and 3rd Brake Light Overlays (not shown in pics)
Optima Red Top Battery

Saleen Air Management Design:
Urethane Front Fascia
Urethane Side Skirts
Urethane Rear Fascia
Louvered Side Scoops
S281 Rear Wing
"C" Pillar Roof Treatment

Saleen Racecraft Suspension:
Variable Rate Coil Springs
Front Sway Bar and Pivot Bushings
N2 Struts and Bushings
N2 Rear Shocks
High Performance Wheel Alignment & Tuned Chassis

Saleen Styling and Interior:
200 MPH Speedo / White Faced Gauges
Twin Gauge Pod
Graphics and Identification
Championship Wreath
Rear Deck Badge
Fender Badges
Serialized Engine Bay Plaque
Serialized Console Plaque
Serialized Bumper Number
S281 Door Carpet Insert
Black Painted Door Handle Trim

Saleen Optional Equipment:
Saleen Leather Seating
13" Brake System by Brembo
Saleen Floor Mats

Pictures:

130.gif


129.gif


087.gif


093.gif


106.gif


109.gif


120.gif


117.gif


Dyno below is a few tunes old, but shows the power the car makes on 93 octane and methanol. As you can see, she was a bit lean up top, but car has been retuned several times since and is dialed in perfectly.

Dyno.gif
 
Last edited:

Apicia

Active Member
Established Member
Joined
Jul 8, 2007
Messages
1,426
Location
MA
Just dropped in an Optima Red Top battery. Looks nice.
 

Apicia

Active Member
Established Member
Joined
Jul 8, 2007
Messages
1,426
Location
MA
Forgot to mention how nice the car sounds at idle with the lope of the blower cams. It was built right and no expense spared.
 

cmb570

Member
Established Member
Joined
Dec 10, 2005
Messages
954
Location
North Carolina
04 OW mach 1 25k miles mods: Kooks exhaust, CAI, short throw, mag500 rims, full coil overs?

why are you getting rid of ?
 

Users who are viewing this thread



Top