592rwhp 548rwtq vids

[bad360rt]

http://videos.streetfire.net/video/4DC64467-47C4-4A18-B9A4-4A49EA65DEBA.htm

http://videos.streetfire.net/video/FEA79AA2-FAD3-467C-984D-AD0EDEA0C9A5.htm

Just finished putting in my full return fuel setup on saturday, dyno'd on sunday. Needless to say, I'm extremely happy. I'm putting in a methanol kit on Friday, then I'll see if I can't find another 8hp ;-) Hoping to hit the track next week, but right now they're calling for rain :mj:

I know it's not an SVT, but I figured I'd share anyway :beer:

 

[jeffsvt]

Very nice ! I'll bet that thing is a handful when full boost comes on !

 

[Silverboost]

what are your mods...is your block forged?

 

[bad360rt]

Yeah, it's pretty useless on street tires LOL

Mods are Paxton Novi-2000, air/water intercooler, 58mm tb, 4bbl intake, 1.7 rr's, 2.02 heads (mild port), headers, 2.5" true duals (I need to go bigger), full return fuel setup, pcm flash, built tranny. And the bottom end isn't forged :uh oh: So yeah, it's a ticking timebomb LOL I'm putting a methanol kit on this week, gonna try for a 10sec pass, and then detune it to keep it alive until I can do a forged bottom end.

Thanks guys :thumbsup:

 

[Blown408 86GT]

http://videos.streetfire.net/video/4DC64467-47C4-4A18-B9A4-4A49EA65DEBA.htm

http://videos.streetfire.net/video/FEA79AA2-FAD3-467C-984D-AD0EDEA0C9A5.htm

Just finished putting in my full return fuel setup on saturday, dyno'd on sunday. Needless to say, I'm extremely happy. I'm putting in a methanol kit on Friday, then I'll see if I can't find another 8hp ;-) Hoping to hit the track next week, but right now they're calling for rain :mj:

I know it's not an SVT, but I figured I'd share anyway :beer:

Thanks for sharing...Thats cool! How much boost is the Paxton running?

 

[2k1cobra]

Yeah, it's pretty useless on street tires LOL

Mods are Paxton Novi-2000, air/water intercooler, 58mm tb, 4bbl intake, 1.7 rr's, 2.02 heads (mild port), headers, 2.5" true duals (I need to go bigger), full return fuel setup, pcm flash, built tranny. And the bottom end isn't forged :uh oh: So yeah, it's a ticking timebomb LOL I'm putting a methanol kit on this week, gonna try for a 10sec pass, and then detune it to keep it alive until I can do a forged bottom end.

Thanks guys :thumbsup:

Theres gonna be Dakota guts everywhere on the track. :uh oh: LOL j/k nice numbers and good luck at the track! :beer:

 

[Silverboost]

holy shit that is impressive...what kind of internals does the stock 5.9 have?...

 

[bad360rt]

Thanks for sharing...Thats cool! How much boost is the Paxton running?

The gauge said 18psi, but there's some debate as to whether or not that's accurate, since the pulley I'm running, combined with the losses through the intercooler, shouldn't be making that much boost.

 

[bad360rt]

Theres gonna be Dakota guts everywhere on the track. :uh oh: LOL j/k nice numbers and good luck at the track! :beer:

LOL Probably! Only one way to find out :burnout:

 

[bad360rt]

holy shit that is impressive...what kind of internals does the stock 5.9 have?...

Thanks. I'm actually not on the stock internals anymore, I'm running a Mopar replacement shortblock, hyper pistons, forged rods. I'm gonna try to keep it alive a lil while longer with race gas and methanol, but a fully built shortblock is definitely in my future. My a/f on those pulls was pegged at 10.0, I'm gonna lean it out a lil bit, but still keep it in the high 10's/low 11's to be safe.