400lph walbro install

[TurboSVT96]

Just about to drop one in my turbo 96 cobra and curious if you guys that have installed them in the stock hanger used the plug that came with the install kit or just ran stock hanger wires straight to pump. + side and - side terminals are different size from each other. But don't like how close the wires from the stock hanger get when plugged into the adapter that came with install kit. Thanks, Jon

 

[TurboSVT96]

 

[PIbird95]

looks good to me... I'm getting ready to put the same pump in my 96 Tbird. With The stock hanger also and stock connector. I'll use 10gauge wire to the connector.

 

[TurboSVT96]

Thanks, ill find out in a few more weeks how she runs. Just have a few more things to button up on my build. That's the biggest pump I could find that fit in my tank.

 

[Robertp]

be sure and run some 10 guage wire to the fuel hat as that pump can pull 17 ams and the stock wiring is not up to the task, go ahead and run a 6 gauge wire to the trunk and use a relay and 10 gauge to pump use stock wire as trigger

Robert

 

[Txroughneck]

Got 2 of them bitches in my kb cobra and love them

 

[TurboSVT96]

Heard nothing but good things about the 400. That's why I went with it. I have a BAP installed as well. But still need to check the wires to the hat. Thanks robertp

 

[Robertp]

No problem as others have said I run dual 405 in my tbird and my cobra there are bad ass pumps I hope to propel the bird into 9s Saturday, went 10.04 already off the rev limiter and without these pumps it would not be possible, making the stock stuff work with 2 of them was a tigh fit but it fit

Robert

 

[TurboSVT96]

I'd like duals. But for my power level a single should do. And there's no way I'm fitting twins in my stock tank. LOL. I had to safety wire pump to hanger just to make it clear.