3 way switch radiator fan help

[follervidez]

OK guys after having issues with the fan replacing the fuse ,relays ,coolant sensor I'm hooking the radiator to a switch directly. The 03 cobra fan has a low and high and a ground wire.what would be best to hook up. A 3 position switch? Which I'm not sure how to wire...or 2 separate switches one for low speed and one for high speed with the ground wire connecting both switches. Wiring if confusing any help is greatly appreciated

Sent from my SAMSUNG-SGH-I337Z using the svtperformance.com mobile app

 

[follervidez]

Can someone show me how to hook up a 3 position switch to the 03 cobra radiator fan. Or would 2 switches be better? Low speed and high speed

Sent from my SAMSUNG-SGH-I337Z using the svtperformance.com mobile app

 

[hotcobra03]

I've came across an issue on fan working intermittently.

The connector was clipped in.but the barrels on fan side were pushed back were it was a loose connection. .

It was melted and black..

Looking inside connector..barreled were 1/8 of an inch away from red lock..
I pulled lock..pushe'd wire's into connector and put lock in..

I even brought a new fan thinking it was just old and wore out..

These have also been known to break the ring causing fan to not spin...


You can look in the how to section..should find something on wiring a switch..

Some have for intercooler pump to run after car is off
.I would assume some have wired fan to cool by switch..