This is just to gauge interest. I will entertain serious offers.
List of Parts that could be yours.
3.4 Whipple with HPP Modified inlet. $3400, Less than 20 miles. All Dyno and track Time. Made 720Hp to the tires on slicks.
Metco x10 Kit. 6lb lower. 3.5 Whipple upper with 3.7 +3.5 alt pulley $1000
Kooks Stainless 1 5/8" headers with 2.5" x Pipe and 3" shorty cat back $850
Dynamic Mighty Mite C4 trans for Mod Motor (less than 15 passes on it since fresh Fluid changed religiously) reverse manual valve body with trans brake , B&M hammer shifter, Neal chance converter, Drive shaft $3200
03 Cobra Blower setup minus blower, Lower intake, intercooler, Heat exchanger, pump, oil cooler, coolant hoses and pipes, Front cover stock lower pulley setup and stock idlers $1500
Polished CPR Fuel Rails $200
RC 75lb High Imp Injectors $575
LFP TB $300
4.5" Aluminum intake for big blower with filter $200
10 Gallon water tank with -12 fittings live well lid, insulated, 2 mezeire 20gph water pumps with hose for trunk mount $350
Low 9 second setup.. need to tweak the converter and gearing and it should run with the fastest in a lightened car. Full weight cobra, AC, Power steering, stereo leather seats, solid rear axle car with 3.73s = 1.3x 60' and 6.0x. Nothing is wrong with the car or any part. I am At the point of my winter upgrades and I am contemplating selling the parts to start a turbo project.
Please PM me only
Video of Teaser dyno - Photobucket - Video and Image Hosting
[ame=http://videos.streetfire.net/video/mikes-03-cobra_197532.htm]mike's 03 cobra- Video[/ame]
Thanks
Mike
List of Parts that could be yours.
3.4 Whipple with HPP Modified inlet. $3400, Less than 20 miles. All Dyno and track Time. Made 720Hp to the tires on slicks.
Metco x10 Kit. 6lb lower. 3.5 Whipple upper with 3.7 +3.5 alt pulley $1000
Kooks Stainless 1 5/8" headers with 2.5" x Pipe and 3" shorty cat back $850
Dynamic Mighty Mite C4 trans for Mod Motor (less than 15 passes on it since fresh Fluid changed religiously) reverse manual valve body with trans brake , B&M hammer shifter, Neal chance converter, Drive shaft $3200
03 Cobra Blower setup minus blower, Lower intake, intercooler, Heat exchanger, pump, oil cooler, coolant hoses and pipes, Front cover stock lower pulley setup and stock idlers $1500
Polished CPR Fuel Rails $200
RC 75lb High Imp Injectors $575
LFP TB $300
4.5" Aluminum intake for big blower with filter $200
10 Gallon water tank with -12 fittings live well lid, insulated, 2 mezeire 20gph water pumps with hose for trunk mount $350
Low 9 second setup.. need to tweak the converter and gearing and it should run with the fastest in a lightened car. Full weight cobra, AC, Power steering, stereo leather seats, solid rear axle car with 3.73s = 1.3x 60' and 6.0x. Nothing is wrong with the car or any part. I am At the point of my winter upgrades and I am contemplating selling the parts to start a turbo project.
Please PM me only
Video of Teaser dyno - Photobucket - Video and Image Hosting
[ame=http://videos.streetfire.net/video/mikes-03-cobra_197532.htm]mike's 03 cobra- Video[/ame]
Thanks
Mike
