27 ford with 2 4v engines and 4 8-71's

Gray_Ghost

Active Member
Established Member
Joined
Feb 13, 2008
Messages
2,171
Location
Rome, GA
I was just about to post about it. I'd love a chance to drop the hammer on that thing. Needs more rubber though.
 

02SILVERBULLET

horsepower addict
Established Member
Joined
Jul 8, 2005
Messages
732
Location
SAN DIEGO
i agree, it has 2 4v mod engines, and i have seen the car in person, but it only has 2 little b&m blowers i dont see any pics with 4 871's... and the little b&m's are spinning almost 1-1 ratio. see the size of the upper pulleys?
dual 871's on a mod motor would be way too much air.
 

Gray_Ghost

Active Member
Established Member
Joined
Feb 13, 2008
Messages
2,171
Location
Rome, GA
i agree, it has 2 4v mod engines, and i have seen the car in person, but it only has 2 little b&m blowers i dont see any pics with 4 871's... and the little b&m's are spinning almost 1-1 ratio. see the size of the upper pulleys?
dual 871's on a mod motor would be way too much air.

It was shown on Counting Cars. It has 4 "871" blowers mounted now. Even if he's not pushing much boost it's a wild setup and looks like something Hot Wheels would have made.
 

ford5.0forlife

Dead Stop
Established Member
Joined
Apr 26, 2006
Messages
3,151
Location
One Car Ahead Of You
quad019.JPG


Sweet Baby Ray's! :uh oh:

I don't care if I couldn't see shit... just point me straight and let it eat!
 

rxpwhistler1

HP Junkie
Established Member
Joined
Mar 14, 2012
Messages
558
Location
Dirty D
^^^I don't think that's the same car...there are two blowers on the vehicle linked in the OP. Dually wheels/tires on the OP vehicle also...
 

BigDan

Active Member
Established Member
Joined
Aug 22, 2009
Messages
1,720
Location
Pollock Pines, CA
Looks stupid now with the 4 blowers...

+1

Someone needs to tell this old man to ditch the old school blowers and get a pair of 4 or 5 liter Whipple's













with normal size pulleys.

Its not like this bucket ever goes WOT so why the ridiculous pulley size.
 
Last edited:

Users who are viewing this thread



Top