2015 Mustang Auto 10.13@137 video

Tim03cobra

New Member
Established Member
Joined
Sep 27, 2003
Messages
577
Location
Oklahoma City
Made a few runs last night with the full exhaust installed. It ran a best of 10.11@137 running 14.5psi on the F1A Procharger (The 5" upper pulley). The track was a little slick and it was hot and humid. Here's a link to the video.
2015 Mustang GT auto 10.13 1/4 mile pass: https://youtu.be/QdMg6YhIxmg
 
Last edited:

Tim03cobra

New Member
Established Member
Joined
Sep 27, 2003
Messages
577
Location
Oklahoma City
Here's a pic of the time slips. The Dark Star front runners are on back order till August. :-(
 

Attachments

  • 2015-07-11 09.06.47.jpg
    2015-07-11 09.06.47.jpg
    272.5 KB · Views: 430
Last edited:

Tim03cobra

New Member
Established Member
Joined
Sep 27, 2003
Messages
577
Location
Oklahoma City
They were right at 15lbs. It would get a little crazy at the top end of the track. The car would start going to the center and swerve. I almost let out of the gas on every run.

Very nice pass!

How much lbs of air did you have in the Hoosiers?
 

burnin4

Car Junkie
Established Member
Joined
Jan 28, 2006
Messages
2,279
Location
everywhere
daaayyyuuummm! That's bada$$!!! what mode are you putting your car in again (Sport/Track)? Are you just turning off Active Handling? Thanks!
 

Tim03cobra

New Member
Established Member
Joined
Sep 27, 2003
Messages
577
Location
Oklahoma City
I push and hold the traction control button for about 9 seconds and put the car in sport mode on the shifter. Then let her rip.

daaayyyuuummm! That's bada$$!!! what mode are you putting your car in again (Sport/Track)? Are you just turning off Active Handling? Thanks!
 

venmousracer

Member
Established Member
Joined
May 28, 2003
Messages
265
Location
plainfield, IL
Tim,
What mods, fuel setup? Anything to the trans? Suspension?

Mustang like yours make me excited and more eager to purchase a 2015 mustang GT.

Eddie
 

Tim03cobra

New Member
Established Member
Joined
Sep 27, 2003
Messages
577
Location
Oklahoma City
Stock fuel system with 95lb injectors. We just added 2 jets of methanol. The suspension is stock with DSS 1400 axles and driveshaft. I have a Circle D 3200-3600 converter in a stock trans. With 60+ 10 second passes with no issues. We'll except traction sometimes.

For the record I just added most of the mods in the past couple weeks. I had over 50 passes in the 10's with 10.53@135 being the best on stock exhaust, converter, axles, driveshafts and wheels with drag radials.

Tim,
What mods, fuel setup? Anything to the trans? Suspension?

Mustang like yours make me excited and more eager to purchase a 2015 mustang GT.

Eddie
 
Last edited:

venmousracer

Member
Established Member
Joined
May 28, 2003
Messages
265
Location
plainfield, IL
Stock fuel system with 95lb injectors. We just added 2 jets of methanol. The suspension is stock with DSS 1400 axles and driveshaft. I have a Circle D 3200-3600 converter in a stock trans. With 60+ 10 second passes with no issues. We'll except traction sometimes.

For the record I just added most of the mods in the past couple weeks. I had over 50 passes in the 10's with 10.53@135 being the best on stock exhaust, converter, axles, driveshafts and wheels with drag radials.

Wow, I am amazed, on paper it does not seem like a lot of parts.

I am new to this whole new style of world performance in the mustang scene, with the coyote motor and a6 auto Trans. I recently sold my foxbody, I have been a Foxbody guy for a long time building and street driving. I was not a big fan of the s197 chassis., Or the look of the car.

I sat in a s550 mustang chassis, I was amazed at the fit and finish, almost like sitting in an audi.

All this fun with a/c cooled seats!

I can't wait to pick o e of these bad boys up. And mod it!!!

Eddie
 
Last edited:

whooshified

Member
Established Member
Joined
Sep 12, 2014
Messages
145
Location
Reading, PA
Stock fuel system with 95lb injectors. We just added 2 jets of methanol. The suspension is stock with DSS 1400 axles and driveshaft. I have a Circle D 3200-3600 converter in a stock trans. With 60+ 10 second passes with no issues. We'll except traction sometimes.

For the record I just added most of the mods in the past couple weeks. I had over 50 passes in the 10's with 10.53@135 being the best on stock exhaust, converter, axles, driveshafts and wheels with drag radials.

doin' it right!
nice work man!
 

Users who are viewing this thread



Top