2013 GT Full Bolt ons/ Full Exhaust

[cheesySLOBRA]

I am thinking about buying a 2013 Mustang 5.0, but i would like to know how how much power one puts to the wheels BONE STOCK. Also the power to the wheels if it had these MODS:

- Longtubes
- X-Pipe w/ Cats
- Muffler Delete
- Intake
- Tune

6-Speed, NOT AUTO


Also, i would order one with 3.73's...so with the mods and track package, what would be its 1/4 time on street tires???...12.2-12.4???

 

[Ratchet]

I am thinking about buying a 2013 Mustang 5.0, but i would like to know how how much power one puts to the wheels BONE STOCK. Also the power to the wheels if it had these MODS:

- Longtubes
- X-Pipe w/ Cats
- Muffler Delete
- Intake
- Tune

6-Speed, NOT AUTO


Also, i would order one with 3.73's...so with the mods and track package, what would be its 1/4 time on street tires???...12.2-12.4???

I am going to find out in the spring how much power they make bone stock. I am thinking depending on dyno they would be 360-370 rwhp and about the same tq wise... and with the mods you list, in the 415-420 rwhp range with about 405 +/- tq. depending on who is doing the tuning.

As for times, with mods on street tires, with driver mod 12.0 -12.4 on big street tires, and with tires anywhere from 11.6-11.8 track/air quality dependent.:beer:

 

[natedog_1959]

Read the BBR / RTR long-tube install thread. That car has exactly what you are looking for. long tubes/x-pipe/better mufflers/intake/tune. It made 442 RWHP. Not sure of track times. It is setup more for cornering/braking than straight line.

Nate

 

[MYFSTSVT99L]

Got a buddy that made 365hp on a completely stock 2013 on a dynojet.

 

[KWClutch]

I put down 387/376 on a dynojet stock with 2013 GT500 axleback.

[youtube_browser]3daTtFuNfT4[/youtube_browser]

 

[dirtyd88]

I made 378/365 SAE on a completely stock car with normal GT500 ABs and 3.55 gears. With 3.73s, you will probably put down 381/370 or so SAE.

After all those mods, probably 410-415/400ish. JLT took their car when they were first released and made just over 400/385 with tune, CAI, ORX, and ABs. Figure that LTs will be good for another 10/10-15 with those mods supporting.

 

[dirtyd88]

I put down 387/376 on a dynojet stock with 2013 GT500 axleback.

[youtube_browser]3daTtFuNfT4[/youtube_browser]

Josh, were your numbers SAE or STD?

 

[KWClutch]

No idea. It was at TS for dyno day.

 

[dirtyd88]

No idea. It was at TS for dyno day.

Looked back at the video and it looks like it says STD, so the SAE numbers were probably a little lower. My car made 386/373 and 387/375 in STD when I did my run in Oct.

 

[KWClutch]

Then I guess I'd be what your numbers are when corrected. Basically have the same mods except I have the 3.73s.

 

[Alien STI]

I am thinking about buying a 2013 Mustang 5.0, but i would like to know how how much power one puts to the wheels BONE STOCK. Also the power to the wheels if it had these MODS:

- Longtubes
- X-Pipe w/ Cats
- Muffler Delete
- Intake
- Tune

6-Speed, NOT AUTO


Also, i would order one with 3.73's...so with the mods and track package, what would be its 1/4 time on street tires???...12.2-12.4???

You could youtube this if you dont wanna search on here.. but depending on elevation mid 11s easy with the mods your asking about. These cars do mid 12s to low 12s stock in my area. Power should be around 400-425whp

 

[clinton2003]

I am thinking about buying a 2013 Mustang 5.0, but i would like to know how how much power one puts to the wheels BONE STOCK. Also the power to the wheels if it had these MODS:

- Longtubes
- X-Pipe w/ Cats
- Muffler Delete
- Intake
- Tune

6-Speed, NOT AUTO


Also, i would order one with 3.73's...so with the mods and track package, what would be its 1/4 time on street tires???...12.2-12.4???

I have everything but longtubes, but have cat deletes. I make 415/395

With longtubes i may see 430-435/415-425 which would be cool.

 

[gs462]

My 13 GT BONE STOCK made 376/356 on a mustang dyno.

 

[me32]

I put down 387/376 on a dynojet stock with 2013 GT500 axleback.

[youtube_browser]3daTtFuNfT4[/youtube_browser]

Great numbers man.

 

[KWClutch]

Thanks. I'm very happy with the car so far.

 

[Falcon Fixer]

2011 GT
Stainless Works long tubes, x, hi flow cats and a cat back with a Steeda CAI.
Custom Dyno tuned= 422 horse and 389 torque SEA

 

[truebluedevil02]

My 2013 M6 made 393whp, 390wtq with gutted stock cats, and a bama tune.

 

[dirtyd88]

Those have to be STD numbers....not trying to sound rude.