Tucker
Active Member
Removed fogs
Home Depot gutter gaurd W/ PlastiDip
Blacked out horse
JLT Brake cooling bezels
Headlight/side light tint
Home Depot gutter gaurd W/ PlastiDip
Blacked out horse
JLT Brake cooling bezels
Headlight/side light tint
Removed fogs
Home Depot gutter gaurd W/ PlastiDip
Blacked out horse
JLT Brake cooling bezels
Headlight/side light tint
I was actually thinking about doing this since I didn't want to get rid of my LED fogs but I just couldn't justify couple hundred bucks just to have a tri emblem in the middle instead of the horse. I ended up going with 2013 Cali special grill set. I have to get some pics together.
Sent from my iPad 3 using Tapatalk HD
how much did the CS grill set cost you?
Hmmm, maybe you either clip it over the grille if you want fogs or remove the stock piece if ya don't want em and it clips into the factory retainers. I could live without the fogs, I like the billet look a lot, and just get the cs fogs down the road.
from the sound of it you remove the grill but can keep the fogs behind the new grill if you wish.Retro Upper Grille. Add an aggressive edge to your Mustang with a retro style grille that features 7 horizontal bars. This 7 bar retro upper grille has a very unique design that allows you to keep your stock factory fog lights intact behind the grille or you can remove them altogether, the choice is up to you! This upper grille is a replacement grille that requires removing your stock factory grille. Matching Lower Grille. The optional 5 bar lower billet grille is a perfect match to the upper to complete the appearance of your Mustang. The Lower grille is an overlay that attaches over the stock factory lower grille.
Removed fogs
Home Depot gutter gaurd W/ PlastiDip
Blacked out horse
JLT Brake cooling bezels
Headlight/side light tint
Just installed the Grille from AM. LOVE it. you can leave the stock fogs in place if you want. I took them out until i can get some tint for them so they will not be noticeable. The lower is designed to be mounted over the stock honeycomb but I didnt want the chance you could see it so I fabricated a bracket to mount it with the lower grille removed.
Are they well made and How do you like them? How hard was it to make a bracket for the lower?
Just installed the Grille from AM. LOVE it. you can leave the stock fogs in place if you want. I took them out until i can get some tint for them so they will not be noticeable. The lower is designed to be mounted over the stock honeycomb but I didnt want the chance you could see it so I fabricated a bracket to mount it with the lower grille removed.
best looking setup for the 13's i have seen yet. now add some cs fogs and your money.
i like the AM grille i just wish it mounted with the fogs inset to the grille, cuase i love my fogs as well.
just two pieces of Aluminum that I bent around the grille opening. I can get better pics if need be.Better pics of bracket setup? That was my plan as well, i figured something could be rigged up to make it work.
Ryan, only thing I would think about doing if I were you would be to trim away the excess plastic that shows from the OE grill, and find a way to not make the grill so "see through"
I know that sounds anal...