I have been going back and forth for a while now and finally made a decision today to sell my Terminator and buy a gt350. This car has been a garage queen for the last 2 years and I have only put ~3k miles on it since I purchased it in February of 2018. Its currently sitting at ~48k miles but that may go up as I tend to drive it around town.
Engine was rebuilt by NextGen Autosport in October 2016, was sent to a machine shop and have everything done to it, bore, hone, blueprint and balance. Was bored .020 over with brand new Mahle forged rods and Pistons with the stock crank.
Ill try and list everything that is done to the car but I am likely missing quite a bit and will update as I remember.
Engine-
Stegmaier ported blower, stage 7 I believe.
Billetflow 2.76 Pully
JLT Fender Well Intake
JLT Oil Seperator
Mahled forge Rods and Pistons
Heads rebuilt with all new valves and bronze valve guides
BBK Longtube Headers and Matching Midpipe
Car Made 472/448 at the wheels
Rear end rebuilt in April 2017 with 4.10's.
18" FR-500's, 295/35 05'rs with less that 1k miles Hancook Ventus 275/40's up front
Have 2 Extra 18x9 FR500's which will be thrown in with the car
New Headlights and Fog Lights to replace the factory ones which had fogged over
Lowering Springs with Stock bilsteins, not sure of brand.
SCT xcal 4 handheld tuner included
2nd pair of smoked headlights
Interior is 9/10
No Rips, Tears or Stains on any of the seats
Ken wood head unit, still have stock head unit, everything else in interior is stock.
I Have all the stock parts for this car with the Exception of the stock exhaust manifolds
Asking 28k, would also be willing to Trade for a gt350 plus cash on my end obviously.
Engine was rebuilt by NextGen Autosport in October 2016, was sent to a machine shop and have everything done to it, bore, hone, blueprint and balance. Was bored .020 over with brand new Mahle forged rods and Pistons with the stock crank.
Ill try and list everything that is done to the car but I am likely missing quite a bit and will update as I remember.
Engine-
Stegmaier ported blower, stage 7 I believe.
Billetflow 2.76 Pully
JLT Fender Well Intake
JLT Oil Seperator
Mahled forge Rods and Pistons
Heads rebuilt with all new valves and bronze valve guides
BBK Longtube Headers and Matching Midpipe
Car Made 472/448 at the wheels
Rear end rebuilt in April 2017 with 4.10's.
18" FR-500's, 295/35 05'rs with less that 1k miles Hancook Ventus 275/40's up front
Have 2 Extra 18x9 FR500's which will be thrown in with the car
New Headlights and Fog Lights to replace the factory ones which had fogged over
Lowering Springs with Stock bilsteins, not sure of brand.
SCT xcal 4 handheld tuner included
2nd pair of smoked headlights
Interior is 9/10
No Rips, Tears or Stains on any of the seats
Ken wood head unit, still have stock head unit, everything else in interior is stock.
I Have all the stock parts for this car with the Exception of the stock exhaust manifolds
Asking 28k, would also be willing to Trade for a gt350 plus cash on my end obviously.