Added updated pics. 08/09
http://www.chicagosvt.com/forums/showthread.php3?t=23298
Details listed below.
http://www.chicagosvt.com/forums/showthread.php3?t=23298
Details listed below.
Last edited:
2003 Black Cobra Coupe F/S
- Thread starter 79KTs03
- Start date
ttt
ttt
Uodated Pics 08/09
PM me your lowest price please. I will be in IL next week looking at a sonic blue so maybe I could come take a look at yours. Thanks
Click on the link in the first post for pics.
I really hate to sell my cobra but the time has come. Here's the list:
-2003 Black Cobra Coupe - 22,742 miles
-Tan seat inserts
-Stock chrome front rims, AFS reps on rear 17x10.5. 275/40/17 nitto 555 front, 315/35/17 rear Less than 2000 miles on tires.
-2 pod a-pillar gauge cluster w/ autometer boost/vac combo, autometer fuel pressure gauge, and raptor shift light. I also have a never used autometer water temp gauge which I'll include.
-Accufab single blade throttle body w/ plenum, both polished
-2.2L Kenne Bell blower w/ 15 psi pulley installed and 8 & 19 psi pulley included.
-KB Boost-a-pump
-60# siemens fuel injectors
-JLT Cold air intake.
-Diablosport predator tuner w/ DS MAFia
Tuned by James @ RWD
-Centerforce DF clutch w/ centerforce aluminum flywheel steeda firewall adjuster and steeda quick release clutch quadrant
-26 spline input shaft
-LDC cooling h2o mod
-Pro 5.0 shifter
-Kooks LT headers with kooks x-pipe, magnaflow highflow cats and borla stinger cat back
-Gords twin fan heat exchanger (NOTE: fans are not wired)
-MM full length subframe connectors
-Hurst roll control line lock
-Solid rear axle built by Aaron Stapleton of Fast Forward racecars:
Stock ford 8.8 housing
Chassis Engineering Advantage mustang control arms
Chassis Engineering AM anti-roll bar
Mosier 31 spline axles
Stock axle studs
3.73 gear set
Tru-trac posi unit
wilwood pro street brakes w/ parking brake
9" axle ends
FFW 8.8 round tube housing brace
Chassisworks big ford housing ends
Strange 10-way adjustable coil over shocks
-Maximum motorsports tubular k-member, tubular control arms. Koni adjustable coilovers. MM caster/camber plates. MM oil filter relocation kit.
The MM setup was installed by Aaron Stapleton of Fast Forward Racecars: http://www.fastforwardracecars.com. Sutton HP adjusted and aligned it for me.
I will also include an uninstalled Innovate Motorsports LC-1 A/F ratio gauge with wideband o2 sensor.
============> $28,000 FIRM NO TRADES
Unported eaton, stock IRS, and stock K-member/control arms are included if the buyer wants them.
I do not have dyno numbers or times with the KB installed. Pre-KB numbers and times are in my sig. Car has NOT been raced with the KB.
I really hate to sell my cobra but the time has come. Here's the list:
-2003 Black Cobra Coupe - 22,742 miles
-Tan seat inserts
-Stock chrome front rims, AFS reps on rear 17x10.5. 275/40/17 nitto 555 front, 315/35/17 rear Less than 2000 miles on tires.
-2 pod a-pillar gauge cluster w/ autometer boost/vac combo, autometer fuel pressure gauge, and raptor shift light. I also have a never used autometer water temp gauge which I'll include.
-Accufab single blade throttle body w/ plenum, both polished
-2.2L Kenne Bell blower w/ 15 psi pulley installed and 8 & 19 psi pulley included.
-KB Boost-a-pump
-60# siemens fuel injectors
-JLT Cold air intake.
-Diablosport predator tuner w/ DS MAFia
Tuned by James @ RWD
-Centerforce DF clutch w/ centerforce aluminum flywheel steeda firewall adjuster and steeda quick release clutch quadrant
-26 spline input shaft
-LDC cooling h2o mod
-Pro 5.0 shifter
-Kooks LT headers with kooks x-pipe, magnaflow highflow cats and borla stinger cat back
-Gords twin fan heat exchanger (NOTE: fans are not wired)
-MM full length subframe connectors
-Hurst roll control line lock
-Solid rear axle built by Aaron Stapleton of Fast Forward racecars:
Stock ford 8.8 housing
Chassis Engineering Advantage mustang control arms
Chassis Engineering AM anti-roll bar
Mosier 31 spline axles
Stock axle studs
3.73 gear set
Tru-trac posi unit
wilwood pro street brakes w/ parking brake
9" axle ends
FFW 8.8 round tube housing brace
Chassisworks big ford housing ends
Strange 10-way adjustable coil over shocks
-Maximum motorsports tubular k-member, tubular control arms. Koni adjustable coilovers. MM caster/camber plates. MM oil filter relocation kit.
The MM setup was installed by Aaron Stapleton of Fast Forward Racecars: http://www.fastforwardracecars.com. Sutton HP adjusted and aligned it for me.
I will also include an uninstalled Innovate Motorsports LC-1 A/F ratio gauge with wideband o2 sensor.
============> $28,000 FIRM NO TRADES
Unported eaton, stock IRS, and stock K-member/control arms are included if the buyer wants them.
I do not have dyno numbers or times with the KB installed. Pre-KB numbers and times are in my sig. Car has NOT been raced with the KB.
Last edited:
ttt
Still for sale.
ttt
Bosstang94
New Member
im very interested in your car please pm me ur email or something so i can talk to you more about it..i can't pm anybody yet cause i guess i dont have enough posts or something:shrug:
Still for sale?
Yes. Still for sale.
Sale Pending.
Sold 
Users who are viewing this thread
