ONEBALLDEEP2000
New Member
Selling my set up out of my mustang. Includes all the wiring, t-45 trans, fuel tank and pumps, engine, radiator, ECU, and nitrous system.
Motor:
-4.6
- diamond flat top Pistons with valve reliefs
-forged pistons and rods
-03-04 oil pump
-ARP crank studs
-Milled and ported heads
-comp cams stage 3
-Bullitt intake
-accel coil packs
-bbk high flow fuel rails
-bbk under drive pulley kit
-long tube headers
-all built with ARP hardware
-12:1 compression
-built to handle 200 shot of nitrous
Transmission:
-t-45
-spec stage 3 clutch
-bbk short throw shifter
-brand new throw out bearing
Fuel tank:
- 315 gpm single fuel pump
Nitrous:
- zex nitrous system
-all lines needed
-NOS bottle opener
-NOS bottle warmer
-nitrous bottle pressure gauge
-NOS purge solenoid
ECU:
Has three different tunes that can be installed. As of now there is a street and nitrous tune installed and can be switched on the fly.
This is the complete setup out of my car. I am upgrading and will no longer need any of these parts. Oil pan and valve covers able to be removed easily for internal inspection. This would be a great plug and play for a fox body or any other vehicle. I have videos of the vehicle running just ask. Serious buys only please and I'm firm on price. You couldn't build the engine for what I'm asking for my whole setup.
Motor:
-4.6
- diamond flat top Pistons with valve reliefs
-forged pistons and rods
-03-04 oil pump
-ARP crank studs
-Milled and ported heads
-comp cams stage 3
-Bullitt intake
-accel coil packs
-bbk high flow fuel rails
-bbk under drive pulley kit
-long tube headers
-all built with ARP hardware
-12:1 compression
-built to handle 200 shot of nitrous
Transmission:
-t-45
-spec stage 3 clutch
-bbk short throw shifter
-brand new throw out bearing
Fuel tank:
- 315 gpm single fuel pump
Nitrous:
- zex nitrous system
-all lines needed
-NOS bottle opener
-NOS bottle warmer
-nitrous bottle pressure gauge
-NOS purge solenoid
ECU:
Has three different tunes that can be installed. As of now there is a street and nitrous tune installed and can be switched on the fly.
This is the complete setup out of my car. I am upgrading and will no longer need any of these parts. Oil pan and valve covers able to be removed easily for internal inspection. This would be a great plug and play for a fox body or any other vehicle. I have videos of the vehicle running just ask. Serious buys only please and I'm firm on price. You couldn't build the engine for what I'm asking for my whole setup.
Last edited: