2.9 whipple install help

[waldo282]

Installing my 2.9 Whipple this weekend on my '08 Shelby and had a question. On the stock Eaton there is an O-ring on the inlet to the throttle body that isn't on the Whipple. I am going to run the crusher inlet with a CJ throttle body but didn't know if there should be a gasket in-between or something?

Any help is appreciated.

Graham

 

[kingcobra8541]

I used black RTV on my 2.3 whipple with an accufab and it has worked fine with no leaks...