2.87" Pullied Vortech - What Belt and MAF?

[SuperG]

I have the standard setup and am getting ready to add an intercooler and increase the boost. Using a 2.87" pulley, what belt size will I need?

Also, what MAF would you recommend?

Thanks for the help!

 

[SuperG]

Does anyone have this setup?

 

[hus]

Here's my MAF:
SCT Automotive Performance Products

I'm currently having a 10lb Vortech Pulley installed with new belt so I can't help you on that one.

 

[scotty98]

if it's on a 6rib you will get way to much slip. and if you got an 8 rib set up a 112.5 will work. thats what i use on my 2.75 set up and it's tight to get on but works great. and 90lmaf with a mafi or a ba2400+ should do the trick

 

[SuperG]

Thanks guys...unfortunately I don't have the rib setup...

 

[SuperG]

Guys I am still looking for an answer...I finally have some time to throw this together...

 

[98 Saleen Cobra]

I"m not to sure of the belt size but you will need either a Lightning MAF with a Mafia or a SCT 2400,2800. Hope this helps.

 

[THAITED]

Contact GIJOE 8 ribs kits (google it), he should be able to tell you what size the belt is?

 

[tistan]

Vortech called for a 113" belt for my 3.3 pulley and I ended up with a 109". I don't know if there will be a definite answere on the belt size. I would start with whatever belt you have now and subract and inch. Go down to napa and buy a belt, if that one doesn't work Napa is cool about letting you exchange it. I exchanged 5 belts before I found the right one.

 

[SuperG]

Thanks guys!! When done, I'll post back my results.

 

[Furinox]

Im running a 2.9 and my belt is 110.5 I think. My tensioner is also notched to move a little bit further.

I have 0 belt slip with 6 rib using a reichard racing pulley.