I know I will need tune/tuner but is a 2.76 car going to have more SOTP than keeping stock pulley and just going with 4.10 gear ratio ring and pinion?
2.76 pulley
- Thread starter 04taxi
- Start date
A 2.76 is an excellent addition to the Eaton blower and along with a good tune, should net you 50+/- RWHP, which ain't bad!
Seems like 98% of the people go the pulley route. I've never rode in a Terminator with 4.10's, but most people seem to think the stock gears are sufficient.
Either way you go, make sure you have some DR's or you won't notice the SOTP difference because you'll be spinning like crazy.
Either way you go, make sure you have some DR's or you won't notice the SOTP difference because you'll be spinning like crazy.
2.76 Or 2.93 is a good pulley and make some nice power on 93octane. As for the 4:10 gear……I’d keep the stockers
do the pulley! if you do 4.10's your gonna come close to maxing out 4th in the quarter if you do any decent modding....
nice numbers 99rio- is this on 93octo?
yup, 93. thanks :thumbsup:
I have more than enough torque with my 2.8" pulley. Its night and day SOTP difference. You will have traction issues without DR's.
Users who are viewing this thread
