2.3 L TVS compressor/L&M elbow/GT500 throttle body

olaosunt

Member
Established Member
Joined
Jan 20, 2012
Messages
590
Location
Carmel,Indiana
Just swapped the TVS on my 2012 Mustang GT for a 2.9 whipple to throw more boost at my low compression alluminator.
I was told it might fit a lightning with "Tylers adaptor plate "

Here is a picture of it on the car.
Is any one interested?
SOLD-deposit received
It will come with L&M elbow port matchedto blower 69mm pulley (12 lbs of boost with closed intake, 15 lbs of boost with open element CAI)GT500 body,Whipple cold air intake.
Here is a picture when it was still on the car.
photo-129_zpsc5c48484.jpg
 
Last edited:

olaosunt

Member
Established Member
Joined
Jan 20, 2012
Messages
590
Location
Carmel,Indiana
Thanks for the Bump Tyler!
Still available.
I will also have the FEAD brackets,90mm and 100mm idler pulley,new belt and choice of whipple/Roush closed box(they are the same) along with the 69 and 82 mm pulley
 

MustangMan0065

New Member
Established Member
Joined
Feb 19, 2012
Messages
73
Location
NC
How much work is it as far as the difference in pulleys 8-10 rib, and throttle linkage, Iac and all that?
I'm very interested but can't find much on getting it all working other than the adapter plate....
 

mystickb1996

Active Member
Established Member
Joined
Jun 9, 2012
Messages
1,171
Location
Las Vegas
i cannot believe this has not sold!! basicly with a lower intake/intercooler and front mount/pump you can make this work on a 5.0... i wish this was availabe when i was putting tylers plate on my lightning.. bumb for good deal!!!!
 

Users who are viewing this thread



Top