Red 1999 77k miles
The Good:
Just Built the motor with stronger block, has all the good parts inside, I have all the specs on the stuff inside will provide buyer.
Diamond Pistons, Manley Rods, ARP 2000 Bolts, Kellogg Crank, King Bearings, Main studs, Melling billet Oil Pump
Stage 2 heads and Cams
Adjustable cam gears
ARP head studs
ARP Cam Bolts
One Piece crank gear
stainless long tube headers stainless magna flow catback
60# injectors, (was planning on having the whipple by now)
c&l high flow plenum
accufab single blade throttle body
2400 PI Stall
Line valve mod (not installed yet)
dual gt40 (300lph) fuel pumps
Afco Heat Exchanger
Dual Electric Fans
Brand new FMS oil cooler
volant cold air intake
SCT BA2400 Mass air
SCT handheld tuner with 2 custom tunes, (street, and race)
upper pulley
lower pulley
Cal-tracs
brand new Polk MM components in doors, and 2 10" Polk MM subs behind the seats in a thunderform
2 Old school kicker amps in the bed
brand new wet okole seat covers (seats under are in great shape as well)
Autometer boost gauge, and AEM wideband gauge
bed cover, bed rug and bed mat in the bed as well as two kicker amps (the old school good ones), and also have a set of nitto drag radials to go with it on 02 stock wheels.
Boss 20' chrome wheels, tires have about 2000 miles on them and less than a year old
Also comes with a 4 stock 02 silver wheels, no tires
it's lowered with 2" drop spindles, drop shackles in the rear.
Extra upper and lower pullies
Few other extra parts
The Bad:
One head broke the spark plug out. They are fox lake heads, and Im not sure if he's going to give me a new one or not. I really dont have the money to buy new ones right now. Looking to to sell it as a roller with a built block and I will give you the heads.
I'll take $13,000 as it sits. This is a very nice truck. I will take $12,000 without the system. Might be willing to sell it as a roller too for $10,000.
The Good:
Just Built the motor with stronger block, has all the good parts inside, I have all the specs on the stuff inside will provide buyer.
Diamond Pistons, Manley Rods, ARP 2000 Bolts, Kellogg Crank, King Bearings, Main studs, Melling billet Oil Pump
Stage 2 heads and Cams
Adjustable cam gears
ARP head studs
ARP Cam Bolts
One Piece crank gear
stainless long tube headers stainless magna flow catback
60# injectors, (was planning on having the whipple by now)
c&l high flow plenum
accufab single blade throttle body
2400 PI Stall
Line valve mod (not installed yet)
dual gt40 (300lph) fuel pumps
Afco Heat Exchanger
Dual Electric Fans
Brand new FMS oil cooler
volant cold air intake
SCT BA2400 Mass air
SCT handheld tuner with 2 custom tunes, (street, and race)
upper pulley
lower pulley
Cal-tracs
brand new Polk MM components in doors, and 2 10" Polk MM subs behind the seats in a thunderform
2 Old school kicker amps in the bed
brand new wet okole seat covers (seats under are in great shape as well)
Autometer boost gauge, and AEM wideband gauge
bed cover, bed rug and bed mat in the bed as well as two kicker amps (the old school good ones), and also have a set of nitto drag radials to go with it on 02 stock wheels.
Boss 20' chrome wheels, tires have about 2000 miles on them and less than a year old
Also comes with a 4 stock 02 silver wheels, no tires
it's lowered with 2" drop spindles, drop shackles in the rear.
Extra upper and lower pullies
Few other extra parts
The Bad:
One head broke the spark plug out. They are fox lake heads, and Im not sure if he's going to give me a new one or not. I really dont have the money to buy new ones right now. Looking to to sell it as a roller with a built block and I will give you the heads.
I'll take $13,000 as it sits. This is a very nice truck. I will take $12,000 without the system. Might be willing to sell it as a roller too for $10,000.
