1999 Mustang with 2001-2004 traction control switch?

[omj]

I'm doing a double DIN install in my 99 mustang using an 01-04 bezel. Can anyone supply me with instructions for how I need to rewire the traction control switch? My 99 switch harness is one wire short of the 6 wires in the 01-04 switch. 2 of the wires appear to be the same color and match a single wire in my existing switch.

 

[98 svt]

That's the pinout for a 2003

 

[52merc]

01 Cobra T/C Switch is C249.

 

[omj]

View attachment 1735755


That's the pinout for a 2003

Thanks for the pinout. Looking the 99 wiring it looks like I just need to connect my existing PK/BK wire to the 2 PK/BK wires in the 01+ switch.

 

[98 svt]

Thanks for the pinout. Looking the 99 wiring it looks like I just need to connect my existing PK/BK wire to the 2 PK/BK wires in the 01+ switch.

 

[98 svt]

Thanks for the pinout. Looking the 99 wiring it looks like I just need to connect my existing PK/BK wire to the 2 PK/BK wires in the 01+ switch.

That sounds/looks correct to me.

 

[omj]

That sounds/looks correct to me.

I think so too. Hopefully someone will chime in with a pinout for the my 99 so I can be sure but I'm going to try it in a week or so if they don't