1996 Black Cobra Coupe FS 9500 OBO/trade

VP_96COBRA

New Member
Established Member
Joined
Dec 22, 2008
Messages
82
Location
Santee
1996 Black Cobra Coupe FS 7800OBO/trade

7,800OBO. oil changed every 2500-2800 miles. 122--- miles

619-278-1581
drive train has less then 2500mi on it

mod list:
Engine/Performance mods:
- 4.10 CRYO treated FRPP gears
- SPEC Billet steel flywheel
- Brand New t-56 tranny w/ upgraded 26 spline input shaft
- MSD 8.5 Super Conductor Spark Plug Wire
- MSD Blaster Coils Packs
- RUSSELL Steel Re-in forced Brake Lines(not installed)
- Hawk HPS street brake pads
- Power Master Battery
- MGW Short Shifter
- Custom Aluminum drive shaft
- FRPP Drive shaft safety loop
- Quicktime mild steel bell housing
- TA rear end girdle
- Steeda Mil Eliminators
- Steeda Under drive Pulleys
- Steeda Oil Separator kit
- Steeda clutch cable, firewall adj kit
- BBK Off Road X-pipe
- Energy Suspensions Polyurethane Engine mounts
- JLT TRU Cold Air Intake
- Flow master custom exhaust
- HD King Cobra Clutch Kit
- Yukon heavy duty axle
- Baer Decela Rotors front and rear
- Ford Racing Shorty Headers
- Traction-LOK rebuild kit
- Prothane Transmission mount
- SCT X-Calibrator 3
- CR1 Corbeau Microsuede seats (black) left and right
- 3" 5 point harness Corbeau (black) left
- adjustable lumbar left and right
- 5th slot addition both seats
- Corbeau seat tracks
- Nitto 305/35ZR-18 101Y B NT 555R Drag Radial (rear)
- Nitto 265/35ZR-18 93W B NT 555 Extreme Performance (front)
- CANTON Expansion Tank

Suspension Mods:
- MM adjustable rear lower control arms
- MM Front Coil Over Kit w/ hypersprings
- MM Rear Coil Over Kit w/ hypersprings
- MM panhard bar
- MM full length sub-frame connectors
- MM 4 bolt caster/chamber plates
- MM pinion snubber
- Steeda X2 Balljoints
- Steeda Bumpsteer kit
- Steeda Shock Tower Brace
- Polyurethane Offset Rack Bushings
- Camber Adjustment bolt kit
- Bilstein axle wrap shocks-
- Bilstein HD shocks and struts
- Eibach front sway bar(anti roll kit)
- Eibach rear sway bar(anti roll kit)
- Prothane bushings for sway bars
- Polyurethane exhaust hangers
- Lakewood upper control arms

Appearance mods:
- Steeda Black Shift knob
- Sequential tail light kit
- Black lug nut set
- 8" shorty antenna
- GTS Smoked headlight covers
- Shaved bumper down 3 black with 2 clear coats on front
- Black Angel Eye Projectors
- Luminics Pure White H3 Mustang Light Bulbs
- Luminics Pure White 9005 Mustang Light Bulbs
- American Muscle Rear Seat Delete kit
- Black FR500 (18x9) front
- Black FR500 (18x10) back
- Smoked Fog Lights
- Gray Cobra emblem trunk liner
- Saleen S281 style wing(not installed)
- FRPP Competition Shift Light Tachometer
- Gen 2 Smoked Tail lights

- CERVINI Cobra "R" 3.5" fiberglass hood


DSC02770.jpg

DSC02772.jpg

DSC02774.jpg

DSC02776.jpg

DSC02779.jpg

DSC02784.jpg

DSC_0590.jpg

DSC_0591.jpg

DSC03414.jpg

DSC03418.jpg

DSC03422.jpg

DSC03430.jpg

DSC03477.jpg

DSC03459.jpg

DSC03449.jpg

DSC03450.jpg

DSC03451.jpg
 
Last edited:

leftysmoke

SNK B1TE
Established Member
Joined
Jan 23, 2008
Messages
2,949
Location
Ohio
Less than 1500 miles on the drive train. What do you mean by that? The motor was replaced, rebuilt? Or are you referring to the parts in the drive train being that new?
 

VP_96COBRA

New Member
Established Member
Joined
Dec 22, 2008
Messages
82
Location
Santee
sorry for the confusion thats in reference to:
t-56 tranny w/ input shaft
quicktime mild steel bellhousing
mgw short shifter
cryo treated 4.10's gears
ta rear end girdle
custom 3" alum driveshaft w/ FRPP safety loob
king cobra hd clutch kit
 

joel's98gt

New Member
Established Member
Joined
Dec 27, 2008
Messages
10
Location
hilliard
bump . . . if you were within a five hundered miles of ohio, this car would be sold.

any times at the track?
 

VP_96COBRA

New Member
Established Member
Joined
Dec 22, 2008
Messages
82
Location
Santee
onyl 1/8 at qualcomm which is one of the shittiest trcks lol 8.557 but that was before 4.10's and DR's that was on 3.73 and crappy tires
 

Users who are viewing this thread



Top