Not sure if i really want to sell this, kind of just putting it out there to see what kind of a response i get. Car has a lot of money invested, it is very fast, with a few small tweeks it could be extremely fast. May be interested in trades, termi's other turbo cars, vette ect. For a price id want $21,000. If you don't like the price i dont care lol.
1993 mustang coupe, Super straight body, Brand new paint.Body and paint are 9.5 of 10. interior is 9.5 of 10. Car is from down south.
5.3 liter iron block ls motor
All ARP hardware including rod bolts and head studs
Z06 heads (243's) with a little massaging
All new valve train, crane dual springs (good to .675 lift), ls7 lifters, hardend pushrods, new valve seals, etc. etc.
Custom grind Lunati turbo cam (.651 lift)
LS9 head gaskets
Edelbrock intake manifold and fuel rails
120lb Seimens injectors
4150 Accufab throttle body
Extreme velocity hat
I.T.S. 76mm/96ar turbo
HP turbo kit modified to fit the ls (headers not manifolds)
Tial wg and bov
a2a front mount intercooler (hp stage 2)
3bar map sensor
Catch can setup
polished aluminum valve covers
tons of polished aluminum bits
Coil packs are hidden in the inner fender wells for a clean look
MSD wires
Built th350 tranny
Manual valve body
Hurst Ratchet shifter
BBRC billet gas tank (beautiful tank, lol)
Dual walbro fuel pumps
Aeromotive fpr
-10an tank to engine bay, split into (2) -8an's to rails, -6an return
Auburn pro rear diff
Aluminum rear girdle
3.27 gears
31 spline axles
Alum. driveshaft
Baseline relocated upper control arm kit kit with adj. arms
Comp eng lower arms
Comp eng 3way drag shocks
4cyl springs (cut)
air bag
QA1 tubular k member up front
QA1 coilovers
flaming river manual rack
New black 'leather' sport seats from summit
New headliner and visors
'custom' cup holder where stick shift was
Tons of billet trim bits
Autometer monster tach with shiftlight and recall
Autometer boost gauge
AEM wide band
Autometer, fuel psi, oil psi, water temp and battery volts
Laptop mount
Cd player
Pwr windows
Pwr door locks
Tinted windows
New Weld RTS wheels 15x10.5 in rear 15x4 front
275/50/15 Mickey street et drag radials (like new)
Smoked tails
Clear corners
Cervinis 4" cowl hood
Tuned with HP tuners
Compaq laptop with HP tuners and multiple pumpgas and E85 tunes
Aluminum battery box in trunk
1993 mustang coupe, Super straight body, Brand new paint.Body and paint are 9.5 of 10. interior is 9.5 of 10. Car is from down south.
5.3 liter iron block ls motor
All ARP hardware including rod bolts and head studs
Z06 heads (243's) with a little massaging
All new valve train, crane dual springs (good to .675 lift), ls7 lifters, hardend pushrods, new valve seals, etc. etc.
Custom grind Lunati turbo cam (.651 lift)
LS9 head gaskets
Edelbrock intake manifold and fuel rails
120lb Seimens injectors
4150 Accufab throttle body
Extreme velocity hat
I.T.S. 76mm/96ar turbo
HP turbo kit modified to fit the ls (headers not manifolds)
Tial wg and bov
a2a front mount intercooler (hp stage 2)
3bar map sensor
Catch can setup
polished aluminum valve covers
tons of polished aluminum bits
Coil packs are hidden in the inner fender wells for a clean look
MSD wires
Built th350 tranny
Manual valve body
Hurst Ratchet shifter
BBRC billet gas tank (beautiful tank, lol)
Dual walbro fuel pumps
Aeromotive fpr
-10an tank to engine bay, split into (2) -8an's to rails, -6an return
Auburn pro rear diff
Aluminum rear girdle
3.27 gears
31 spline axles
Alum. driveshaft
Baseline relocated upper control arm kit kit with adj. arms
Comp eng lower arms
Comp eng 3way drag shocks
4cyl springs (cut)
air bag
QA1 tubular k member up front
QA1 coilovers
flaming river manual rack
New black 'leather' sport seats from summit
New headliner and visors
'custom' cup holder where stick shift was
Tons of billet trim bits
Autometer monster tach with shiftlight and recall
Autometer boost gauge
AEM wide band
Autometer, fuel psi, oil psi, water temp and battery volts
Laptop mount
Cd player
Pwr windows
Pwr door locks
Tinted windows
New Weld RTS wheels 15x10.5 in rear 15x4 front
275/50/15 Mickey street et drag radials (like new)
Smoked tails
Clear corners
Cervinis 4" cowl hood
Tuned with HP tuners
Compaq laptop with HP tuners and multiple pumpgas and E85 tunes
Aluminum battery box in trunk
Last edited: